Front Panel - Magnavox VR402BMG Hook-Up Manual

22 Front Panel

Remote Sensor
Receives a signal from your
remote control so you can
operate your VCR from a
distance.
POWER Button
Press to turn the
VCR power on and off.
VIDEO In Jack
Connect a cable coming
from the video out jack of
a camcorder, another VCR,
or an audio-visual source
(laser disc player, video disc
player, etc.) here. Details
are on page 32.
VR602BMG
VIDEO L AUDIO R
AUDIO In Jacks
Connect audio cables coming
from the audio out jacks of a
camcorder, another VCR, or an
audio source here. Details are on
page 32.
The VR602BMG is shown here. The
VR402BMG has only one AUDIO
IN jack.
VCR/TV Button
Press to select VCR or TV position.
VCR Position
Use to watch a tape, to watch a program while
recording it, or to watch a TV program (chang-
ing channels at the VCR). When the VCR Light
appears on the display panel, the VCR is in VCR
position.
TV Position
Use to watch TV (changing channels at the TV)
or to watch one program while recording anoth-
er. When the VCR Light does not appear on
the display panel, the VCR is in TV position.
PAUSE Button
While recording, press to pause the recording. Press again to
resume recording. Details are on page 25. You can not pause a
One-Touch Recording. During tape playback, press to freeze the
picture. Press again to resume playback. Details are on page 36.
F.FWD (Fast Forward) Button
When playback is stopped, press to fast forward the
tape at high speed. During tape playback, press to fast
forward the tape while the picture stays on the screen.
Details are on page 36. Press to advance to the next
menu or to change the setting of an item in the menu.
PLAY Button
Press to play a tape. Press to release Slow, Search,
or Still mode and return to playback. Details are on
page 36. Press to select an item in the menu.
REW(ind) Button
When playback is stopped, press to rewind
the tape at high speed. During playback, press
to rewind the tape while the picture stays on
the screen. Details are on page 36. Press to
return to a previous menu.
POWER VCR/TV
CHANNEL (p/o) Buttons
Press to change channels at the
VCR. Or, press to adjust the
tracking of a tape during normal
playback or slow motion play-
back. Also, press to remove
vertical jitter in a Still picture.
STATUS/EXIT Button
Press to access or remove the
on-screen status display. Details are
on page 20. Press to exit on-screen
menus.
REC(ord)/OTR Button
Press once to start a recording. Press
repeatedly to start a One-Touch
Recording. Details are on page 27.
STOP/EJECT Button
Press once to stop the tape. When playback is
stopped, press to eject the tape. Press to select an
item in the menu.
MENU Button
Press to access the VCR menu.
REW F.FWD
PLAY
REC/OTR PAUSE
CHANNEL
STOP/EJECT
STATUS/EXIT MENU