Download Print this page

Mounting Hardware - Cisco Meraki Z1 Installation Manual

Advertisement

LAN ports
WAN / Internet port
USB port
Power input
The Z1 bottom panel
Please note that the serial number is located on the product label at the bottom panel of Z1

Mounting hardware

The supplied wall screws and anchors allow you to mount the gateway on a drywall surface, either vertically or
horizontally.
• For mounting on drywall, use a ¼-in drill bit, then insert the plastic and screw assemblies.
These 4 ports provide connectivity to computers,
printers, access points, or Ethernet switches.
A steady green LED indicates bidirectional connectivity,
and flashing green indicates traffic.
Provides connectivity to the WAN.
USB 2.0 for 3G/4G wireless cards
Designed for use only with the unit's power supply.
3

Advertisement

loading