Fujitsu PRIMERGY TX1330 M3 Operating Manual page 24

Table of Contents

Advertisement

Functional overview
Interfaces
USB 2.0 connectors
USB 3.0 connectors
Graphics (15-pin)
Serial 1 (9-pin)
LAN / Ethernet (RJ-45) 2 x Gbit/s Ethernet
Management LAN
(RJ45)
Onboard or integrated controllers
RAID Controller
SATA Controller
Remote Management
Controller
Trusted Platform
Module (TPM)
24
4 (4x external rear, no USB wake-up supported)
5 (2x external rear, 2x external front, 1x internal for
USB backup device)
1 x VGA
1 x serial RS-232-C, usable for iRMC or system or
shared
1 x dedicated Management LAN port for iRMC S4
(10/100/1000 Mbit/s). Management LAN traffic can
be switched to shared onboard Gbit LAN port
Modular RAID 0/1 controller with "Integrated RAID"
(SAS IR) for SAS3.0.
RAID levels 0 and 1 are supported for internal HDD
configurations.
Modular RAID 0/1 controller with "MegaRAID
functionality" (SAS MegaRAID) for SAS3.0.
RAID levels 0, 1, 10, 1E, 5 and 50 are supported for
internal HDD configurations.
Modular RAID 5/6 controller with "MegaRAID
functionality" (SAS MegaRAID) for SAS3.0. RAID
levels 0, 1, 10, 1E, 5, 50, 6 and 60 are supported for
internal HDD configurations.
A 6-port SATA controller is integrated on the system
board; up to four SATA HDDs can be connected to
the controller. The LSI Embedded MegaRAID
software (SATA Software RAID) supports RAID
levels 0, 1 and 10.
Integrated Remote Management Controller
(iRMC S4), 256 MB DDR3-800 SRAM for video,
IPMI 2.0 compatible
Infineon V1.2 / V2.0 compliant (option)
Operating Manual
TX1330 M3

Advertisement

Table of Contents
loading

Table of Contents