Table of Contents
Advertisement
EnglisH
12
Overload protection
If you press the epilating head too hard onto your skin or when the
epilating discs of the epilating head get blocked (e.g. by clothes etc.), the
appliance switches off and the charging light flashes red for 5 seconds.
Turn the epilating discs with your thumb until you can remove whatever is
blocking the epilating discs.
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Always keep the adapter dry. Never rinse it under the tap or immerse it
in water.
Note: Make sure the appliance is switched off and unplugged before you start
to clean it.
-
If necessary, clean the adapter with the cleaning brush or a dry cloth.
-
After each wet use, clean the appliance thoroughly with water to
ensure optimum performance.
Cleaning the epilating head and attachments
1
Switch off the appliance.
2
Remove the attachment from the epilating head.
3
Push the epilating head to the right (1) and remove it from the
appliance (2).
Note: Never try to detach the epilating discs from the epilating head.
4
Remove loose hairs with the cleaning brush.
5
Rinse all parts under the tap and shake excess water off.
Note: Make sure all parts are completely dry before you reassemble the
appliance.
Cleaning the exfoliation brush
1
Rinse the exfoliation brush under the tap, if necessary with some
soap or shower gel, and let it dry before you store it.
Advertisement
Table of Contents
