Helpful Hints - Philips MVR440MG Owner's Manual

4
Enter the date of the recording. Press PLAY or STOP
repeatedly until the desired month appears. Press
F.FWD.
Next, press PLAY or STOP repeatedly until the
desired day appears. Press F.FWD. The day of the week
will appear. You cannot program the VCR to record more
than one year in advance.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE 0 5 / 0 4 TUE
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
5
Enter the recording's start time.
Press PLAY or STOP repeatedly until the desired
hour appears. Press F.FWD.
Press PLAY or STOP repeatedly until the desired
minute appears. Press F.FWD.
Finally, press PLAY or STOP to point to AM or PM.
AM or PM will flash beside the start time. Press F.FWD.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE 0 5 / 0 4 TUE
START TIME 0 7 : 3 0 P M
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
6
Repeat the procedure in step 5 to set the recording's
end time.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE 0 5 / 0 4 TUE
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
CHANNEL – –
REC SPEED – –
Instructions continue on page 28.
Timer Recording (cont'd) 27
1
1
AM
BPM
1
AM
BPM
4-6
POWER VCR/TV EJECT
PLAY
REW
F.FWD
STOP
STATUS
1 2 3
4 5 6
7 8 9
0
SPEED SEARCH MODE STILL/PAUSE
REC MEMORY SLOW

Helpful Hints

• You cannot access the TIMER
PROGRAMMING menu at step 1
if the clock is not set.The CLOCK
SET menu will appear. See pages
14-15 to set the clock.
• Enter information while the space
is flashing.
• Press REW to go back one step.
• To stop a started timer recording,
press STOP/EJECT on the VCR.
More Helpful Hints are on
pages 42-43.
CH