Supplied Accessories; D Accessory Connectors Set Up - Icom GM600 Instruction Manual

■ Supplied accessories

For the mounting bracket
Mounting bracket
Knob bolts
Screws (5 × 20 mm) Spring washers (M5)
Microphone
Sponges
DC power cable (OPC-891A)*
Microphone hanger
and screws (3 × 16 mm)
The following items are sold as a set with the GM600.
PS-310
Screws (5 × 20 mm)
Spare fuse (FGB 15 A)
DC power cable
(OPC-2352)
Flat washers (M5)
Accessory connectors
6 pin 8 pin
1
* 1 Used for the
transceiverʼs
operation check.
(12 V DC only)
Spring washers (M5)
Flat washers (M5)
Ferrite EMI filter
+ Tie wrap
CONNECTIONS AND MAINTENANCE

D Accessory connectors set up

The accessory connectors are used on the accessory
cables (User supplied) to connect the EXTERNAL
SPEAKER/VDR CONNECTOR, the REMOTE ALARM
CONNECTOR, or the IEC61162-1 CONNECTOR.
(pp. 93, 92)
* 2
Accessory cable (User supplied)
Solder
Be sure to set this ring to keep the waterproof capability.
* 2
10
These illustrations are for the
8-pin connector.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
95