Table of Contents
Advertisement
This chapter contains basic procedures for configuring your displays.
4.1 Configuring a Display with Catalyst Control Center
A display must be connected to your computer before it can be configured.
The following is a basic procedure for configuring a display in
Catalyst™ Control Center's Advanced view. For detailed instructions and a complete
list of configuration options, refer to the help system available with
Catalyst Control Center.
Note: A simplified version of this procedure is available through the
Catalyst Control Center Basic view using the Setup my display configuration option
in the Easy Setup Wizards Tab.
1. Open Catalyst Control Center in the Advanced view.
2. Select the Desktops & Displays page.
3. Configure your displays as necessary:
© 2011 Advanced Micro Devices Inc.
Basic Display Configuration
Note: For more information, see
The Desktops & Displays page is the central location for configuring displays
and arranging desktops (the workspace shown on a display). It contains a display
palette and desktop arrangement area that you can use to select the display or
desktop that you want to configure.
Note: Depending on the version of Catalyst Control Center and operating
system you are running, the settings on the Desktops & Displays page may be
found on the Displays Manager page instead. For more information about this
page, refer to the help system available with Catalyst Control Center.
➭
Change the primary display—In the desktop arrangement area, right-click
the desktop associated with the display that you want to set as primary,
and click Make Primary.
➭
Enable a display—In the display palette, right-click the display that you
want to enable, and click Duplicate or Extend as appropriate.
Click Duplicate to copy an existing desktop onto the selected display; you
may need to select the display that you want to duplicate. Click Extend
create a unique desktop for the selected display; this desktop can have its
own background image, resolution, and refresh rate.
➭
View and change properties such as display size, refresh rate, color
settings, and supported HDTV resolutions—In the display palette, right-
click the display that you want to configure, and click Configure. In the
property page that appears, modify the necessary settings.
Starting the Control Center Software (p.
Chapter 4
15).
AMD FirePro V3900
Advertisement
Table of Contents
