ELNA Creative Series Instruction Book page 23

b
e
n
b Pull the four sides of the fabric to stretch it tight.
Make sure that the fabric is stretched tightly in the
hoop.
t
Turn the outer hoop levers in the direction of arrow.
Remove the template.
e
n Clamp the fabric to the hoop with the clamps.
i
* After sewing, pull the clamp in the direction of arrow to
remove them. Turn the outer hoop levers and remove
the fabric.
NOTE:
• Thick layers of fabric and stabilizer may cause
skipped stitches, or broken threads and needles.
Avoid sewing on the layers thicker than 3 mm (1/8˝).
• Make sure that the anti-slipping sticker is attached
on the embroidery hoop RE36b (refer to 6 page).
21
e Outer hoop lever
t Template
i Clamp