ATEN KN1132V Series User Manual page 247

 Value: 00ff00 = Green
 Value: 000ff = Blue
 SETCABLELEN [channel] [value] => Sets the cable length
 Channel: 0 for local console; 01-08 for remote consoles
 Value: 0 = Automatic, 1 = Disable, 2 = Short, 3 = Long
 SETFORWARD [IP address] => Sets primary switch IP address on
secondary switch for Channel Forwarding
 SETLDAPMEMBER => Sets new value for ldap member.
 SETLDAPMEMBEROF => Sets new value for ldap memberof.
 SETMAXFRAMERATE [frame rate] [mouse move option] => Sets
maximum frame rate and mouse moves option.
 Frame Rate: 1-30
 Mouse Move Option: 0 = Disable frame rate setting if mouse
moves. 1 = Keep frame rate setting if mouse moves.
 SETPROMPT => Sets prompt string.
 SETSSLCIPHER => Sets SSL cipher strength.
 SETUSERINFOEXT [value] => Enables/Disables detailed user login
information for each port to be recorded in the event logs.
 Value: 0 = Disable, 1 = Enable
 SETVCHANNELMODE [value] => Enables Channel Forwarding
 Value: 0 = Disable, 1 = Enable
 SOCKINFO => Displays socket connection information.
 TRACERT => Displays trace route information.
Chapter 10. Maintenance
229