Table of Contents
Advertisement
Thermostat Location
Figure 23. Thermostat/sensor location
Thermostats and Zone Sensors
Table 23. Thermostat selection for use with the Deluxe controller
Thermostat
WSHP-SVX014J-EN
Part Number
X13511535010
1 Heat/1 Cool, non-programmable commercial thermostat for conventional air
conditioners and heat pumps that are configured without auxiliary heat
•
1 H/1 C
X13511536010
3 Heat/2 Cool, non-programmable commercial thermostat for conventional air
conditioners and heat pumps that are configured with or without auxiliary heat.
•
3 H/2 C
X13511537010
3 Heat/2 Cool, programmable commercial thermostat for conventional (rooftop) air
conditioners and heat pumps that are configured with or without auxiliary heat.
•
3 H/2 C
X13511538010
3Heat/2 Cool, programmable touch screen thermostat for conventional air
conditioners and heat pump systems.
The thermostat will provide the human interface, zone temperature sensing both
local and optional remote temperature sensing, and set point scheduling on a daily/
weekly basis.
This thermostat can also display humidity with a control signal for dehumidification
with a local humidity sensor or optional remote humidity sensor.
•
3 H/2 C
Location of the thermostat or zone sensor is an important
element of effective room control.
Areas where the thermostat or zone sensor should not be
located include:
•
Behind doors or corners
•
Near hot or cold air ducts
•
Near radiant heat (heat emitted from appliances or the
sun)
•
Near concealed pipes or chimneys
•
On outside walls or other non conditioned surfaces
•
In airflows from adjacent zones or other units.
Description
Installation
33
Advertisement
Table of Contents
