Table of Contents
Advertisement
•
The initial default setting is
selected as the Home City code: LON (LONDON), PAR (PARIS), ATH (ATHENS),
NYC (NEW YORK), CHI (CHICAGO), DEN (DENVER), LAX (LOS ANGELES),
ANC (ANCHORAGE), or TYO (TOKYO).
•
For details about the Daylight Saving Time setting, see "Daylight Saving Time
(DST)" (page E-48).
4.
Press
A to toggle the currently selected city code
between standard time and daylight saving time.
•
In the city code setting mode, the
indicates STD (standard time) or DST (daylight
saving time).
•
Note that an
indicated only if the currently selected city code is
one that supports time calibration signal reception.
•
While
AT is selected, the watch will switch between
STD and DST automatically in accordance with time
calibration signal data.
STD-AT when any one of the following city codes is
AT setting (STD-AT or DST-AT) will be
v Mode Disk
E-47
Advertisement
Table of Contents
