• For split time readings, you can specify the total race distance only. Though the Press D. watch will indicate a speed each time you take a split reading, they will be based on the total race distance, and so they will not indicate actual intermediate split speeds.
A lap time reading shows the time elapsed since the last lap time reading was taken. • If you want the watch to calculate the speed of each lap (when all of the laps are the same distance), specify the lap distance for the distance setting.
Also take care that sudden illumination by the auto light switch does not startle or distract others around you. • • • • • When you are wearing the watch, make sure that its auto light switch is turned off before riding a bicycle or operating a motorcycle or any other motor vehicle.
Auto Return Features • If you leave the watch with a flashing setting on the display for two or three minutes without performing any operation, the watch will exit the setting mode automatically. • The watch will return to the Timekeeping Mode automatically if you do not perform any operation for two or three minutes in the Alarm Mode.