Download Print this page

Operating Instructions - Electrolux EHI321BEA Installation & User Manual

Advertisement

OPERATING INSTRUCTIONS

Activation and deactivation
Touch
for 1 second to activate or deactivate
the appliance.
Automatic switch off
The function deactivates the appliance automatically if:
All cooking zones are deactivated (
You do not set the heat setting after you activate
the appliance.
You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth, etc.).
The sound operates until you remove the object.
Remove the object or clean the control panel.
The appliance become too hot (e.g. when a
saucepan boils dry). Before you use the appliance
again, the cooking zone must be cool.
You use incorrect cookware. The symbol comes on
and the cooking zone deactivates automatically after
2 minutes.
You do not deactivate a cooking zone or change the
heat setting. After some time,
appliance deactivates. See the table.
The times of Automatic Switch Off
Heat setting
Cooking zone deactivates after
6 hours
-
5 hours
-
4 hours
1.5 hours
-
The heat setting
Touch the control bar at the heat setting. Chnage to the left
or the right, if it is neccessary. Do not release before you
have a correct heat setting. The display shows the heat
setting.
Automatic heat up
).
You can get a necessary heat setting in a shorter time if
you activate the Automatic Heat Up function. This function
sets the highest heat setting for some time (see the
illustration above), and then decreases to the necessary
heat setting.
To start the Automatic Heat Up function for a cooking
zone:
1.
comes on and the
2.
Switching on and off the power function
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 5 minutes at most. After that the induction cooking
zone automatically switches back to heat setting . To
switch on, touch
heat setting between and .
Touch
. The symbol
comes on in the display.
Immediately touch the necessary heat setting. After
3 seconds comes on in the display. To stop the
function change the heat setting.
,
comes on. To switch off, touch a
9

Advertisement

loading