KYMCO FILLY LX 50 Service Manual page 107

9. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
CLUTCH/DRIVEN PULLEY
REMOVAL
Remove the drive pulley. ( 9-6)
Hold the clutch outer with the universal
holder and remove the clutch outer nut.
Remove the clutch outer.
Special
Universal Holder
Remove the clutch/driven pulley assembly
Remove the drive belt from the clutch/driven
pulley assembly.
DISASSEMBLY
Hold the clutch/driven pulley assembly with
the clutch spring compressor.
Set the clutch spring compressor in a vise and
remove the 39mm clutch drive plate nut.
Loosen the clutch spring compressor and
disassemble the driven pulley assembly.
Special
Clutch Spring Compressor
Remove the seal collar.
9-9
Clutch Outer
Universal Holder
Clutch/Driven Pulley
Lock Nut Wrench, 39mm
Clutch Spring Compressor
Seal Collar
FILLY LX 50
Nut