KYMCO FILLY LX 50 Service Manual page 170

15
. IGNITION SYSTEM
IGNITION COIL
REMOVAL
Remove the met-in box. ( 2-3)
Remove the spark plug cap.
Disconnect the ignition coil wires and remove
the ignition coil bolt and ignition coil.
INSPECTION
CONTINUITY TEST
The CDI unit is not adjustable.
timing is incorrect, inspect the CDI unit,
pulser coil and A.C. generator and
replace any faulty parts.
Measure the resistance between the ignition
coil primary coil terminals.
Resistance: 0.1 1.0Ω
Measure the secondary coil resistances with
and without the spark plug cap.
Resistances:
(with plug cap) : 7 12KΩ
(without plug cap) : 3 5KΩ
Correctly operate the tester following the
manufacturer's instructions.
Ignition Coil
If the
FILLY LX 50
15-4