Samsung S27CM50 Series User Manual page 9

S27CM80* / S32CM80* / S27C90*
1
Put the stand base onto the stand neck
as the direction shown in the figure.
Check that the stand neck is firmly
connected.
4
Push the assembled stand into the main body in the direction of the arrow as
shown in the figure.
2
Tightly fasten the connecting screw at
the bottom of the stand base.
- 9 -
3
As shown in the figure, remove the
product and foam cushion, and then
place the product on the table with its
front side facing the floor.
5
Stand assembly is complete.