Samsung S27C750P User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. S27C750P
  6. User manual

Samsung S27C750P User Manual

User manual ver.1.0 (english)
Hide thumbs Also See for S27C750P:
Table of Contents

Advertisement

Quick Links

User Manual

S27C750P
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00309A-02

Advertisement

Table of Contents
loading

Related Manuals for Samsung S27C750P

Summary of Contents for Samsung S27C750P

  • Page 1: User Manual

    User Manual S27C750P The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00309A-02...

  • Page 2: Table Of Contents

    Table Of Contents BEFORE USING THE Copyright PRODUCT Icons used in this manual Cleaning Cleaning Securing the Installation Space Precautions for storage Safety Precautions Symbols Electricity and Safety Installation and Safety Operation and Safety Correct posture to use the product PREPARATIONS Checking the Contents Removing the Packaging...
  • Page 3 Brightness Configuring Brightness Contrast Configuring Contrast Sharpness Configuring Sharpness SAMSUNG MAGIC Bright Configuring SAMSUNG MAGIC Bright SAMSUNG MAGIC Upscale Configuring SAMSUNG MAGIC Upscale Image Size Changing the Image Size HDMI Black Level Configuring the HDMI Black Level Settings Response Time Configuring Response Time H-Position &...
  • Page 4 Table Of Contents Green Configuring Green Blue Configuring Blue Color Tone Configuring the Color Tone Settings Gamma Configuring Gamma COORDINATING OSD Language Configuring Language Menu H-Position & Menu V-Position Configuring Menu H-Position & Menu V- Position Display Time Configuring Display Time Transparency Changing Transparency SETUP AND RESET...
  • Page 5 What is "MagicTune"? Installing the Software Removing the Software MultiScreen Installing the Software Removing the Software TROUBLESHOOTING Requirements Before Contacting Samsung Customer Service Center GUIDE Testing the Product Checking the Resolution and Frequency Check the following. Q & A SPECIFICATIONS General...
  • Page 6 Table Of Contents Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Terminology INDEX Table Of Contents...

  • Page 7: Before Using The Product

    © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.

  • Page 8: Cleaning

    Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands.

  • Page 9: Securing The Installation Space

    (10 cm) (10 cm) 3.93 inches(10 cm) Precautions for storage Be sure to contact Samsung Customer Service Center (page 86) if the inside of the monitor needs cleaning. (A service fee will be charged.) Before Using the Product...

  • Page 10: Safety Precautions

    Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.

  • Page 11: Electricity And Safety

    Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.

  • Page 12: Installation And Safety

    The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed.
  • Page 13 Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire.

  • Page 14: Operation And Safety

    Be sure to consult Samsung Customer Service Center (page 86) before installation if you want to install the product at such a place.
  • Page 15 (paper, match, etc.) into the vent or ports of the product. If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 86).
  • Page 16 Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver.
  • Page 17 Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use.

  • Page 18: Correct Posture To Use The Product

    Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen.

  • Page 19: Preparations

    Preparations Checking the Contents 1.1.1 Removing the Packaging Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. Remove the styrofoam from the product. Check the components and remove the styrofoam and plastic bag. This image is for reference only.

  • Page 20: Checking The Components

    Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown. Components Quick setup guide Warranty card User manual (Not available in some locations)

  • Page 21: Parts

    Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide SAMSUNG MAGIC AUTO BRIGHT SAMSUNG MAGIC AUTO BRIGHT SAMSUNG MAGIC AUTO...
  • Page 22 Preparations Icons Description Move to the upper or lower menu or adjust the value for an option on the OSD menu. Use this button to control the brightness and contrast of the screen. When OSD is not on the screen,push the button to adjust the Volume HDMI mode.

  • Page 23: Reverse Side

    Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. RGB IN DC14V HDMI IN Port About ports Connect to an audio output device such as headphones. Connect to a source device using an HDMI cable.

  • Page 24: Installation

    Preparations Installation 1.3.1 Attaching the cradle Place a protective cloth Remove the packing sheet Insert the stand base into the orcushion on a flat surface. Next, stand body in the direction of the place the product with the face arrow. down on top of the cloth or cushion.

  • Page 25: Adjusting The Product Tilt And Height

    Preparations 1.3.2 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -1° (±2.0°) ~ 26° (±2.0°) You can adjust the tilt of your monitor. Hold the lower part of the product and adjust the tilt carefully.

  • Page 26: Anti-Theft Lock

    Preparations 1.3.4 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. The color and shape of parts may differ from what is shown.

  • Page 27: Magicrotation Auto

    Preparations "MagicRotation Auto" The "MagicRotation Auto" function detects the rotation of monitors that are fitted with a rotation sensor and rotates the Windows screen accordingly. [Software Installation] Insert the user manual CD provided with the product into the CD-ROM drive. Follow the instructions given on the screen to proceed with installation.

  • Page 28: Connecting And Usinga Source Device

    Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product.

  • Page 29: Connecting And Using A Pc

    Connecting and Using a Source Device Connecting and Using a PC 2.3.1 Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection Using the D-SUB Cable (Analogue Type) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable.
  • Page 30 Connecting and Using a Source Device Connection Using an HDMI-DVI Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. HDMI IN HDMI IN RGB IN DC14V Connect the HDMI-DVI cable to the [HDMI IN] port on the back of the product and the DVI port on the PC.

  • Page 31: Connecting And Using A Source Device

    Connecting and Using a Source Device Cables can be fixed as shown RGB IN DC 14V HDIMI IN RGB IN HDMI IN DC14V RGB IN DC 14V HDMI IN RGB I N DC14V HDI M I I N Push the cover stand rear toward Install the cables into the holder Hold the cover stand rear with the PUSH arrow direction with...
  • Page 32 Connecting and Using a Source Device Changing the sound settings on Windows Control Panel Audio Speaker Speaker Setup 2 Connecting and Using a Source Device...

  • Page 33: Driver Installation

    An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download the file. Insert the user manual CD provided with the product into the CD-ROM drive.

  • Page 34: Setting Optimum Resolution

    Connecting and Using a Source Device 2.3.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. The optimal resolution for this monitor is as follows: **** x **** **Hz...

  • Page 35: Changing The Resolution Using A Pc

    Connecting and Using a Source Device 2.3.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display...
  • Page 36 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution. 2 Connecting and Using a Source Device...
  • Page 37 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device...
  • Page 38 Connecting and Using a Source Device Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device...

  • Page 39: Screen Setup

    Configure the screen settings such as brightness. Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when Bright is set to Dynamic Contrast mode.

  • Page 40: Contrast

    Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This option is not available when Bright is in Cinema Dynamic Contrast mode.

  • Page 41: Sharpness

    Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG This option is not available when Bright is in Cinema Dynamic Contrast mode. MAGIC SAMSUNG...
  • Page 42 This menu is not available when Eco Saving is enabled. You can customize the brightness to suit your preferences. 3.4.1 Configuring SAMSUNG MAGIC Bright MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen.

  • Page 43: Samsung Magic Bright

    Screen Setup PICTURE Brightness Contrast Sharpness SAMSUNG Dynamic MAGIC Bright Standard SAMSUNG MAGIC Upscale Movie Custom Image Size HDMI Black Level AUTO AUTO AUTO AUTO SAMSUNG When the external input is connected through HDMI and PC/AV Mode is set to AV,...

  • Page 44: Samsung Magic Upscale

    Bright is in Cinema Dynamic Contrast mode. MAGIC 3.5.1 Configuring SAMSUNG MAGIC Upscale MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen. Press [...

  • Page 45: Image Size

    ] to move to Image Size and press [ ] on the product. The following screen will appear. mode SAMSUNG MAGIC Bright SAMSUNG MAGIC Upscale AUTO Auto: Display the picture according to the aspect ratio of the input source. Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
  • Page 46 Screen Setup This can only be set when the external input is connected through DVI and PC/AV Mode set to AV. Press [ ] to move to the option you want and press [ The selected option will be applied. 3 Screen Setup...

  • Page 47: Hdmi Black Level

    ] on the product. Press [ ] to move to HDMI Black Level and press [ ] on the product. The following screen will appear. SAMSUNG MAGIC Bright SAMSUNG MAGIC Upscale AUTO AUTO AUTO Normal: Select this mode when there is no contrast ratio degradation.

  • Page 48: Response Time

    Screen Setup Response Time Accelerate the panel response rate to make video appear more vivid and natural. It is best to set Response Time Normal Faster when you are not viewing a movie. The functions available on the monitor may vary depending on the model. Refer to the actual product.

  • Page 49: Configuring H-Position & V-Position

    Screen Setup H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. This menu is available in Analog mode only. This menu is only available when Image Size is set to Screen Fit Mode.

  • Page 50: Coarse

    Screen Setup 3.10 Coarse Adjust the screen frequency. This menu is available in Analog mode only. 3.10.1 Adjusting Coarse MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen.

  • Page 51: Fine

    Screen Setup 3.11 Fine Fine-adjust the screen to obtain a vivid picture. This menu is available in Analog mode only. 3.11.1 Adjusting Fine MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen.

  • Page 52: Configuring Tint

    Configuring Tint SAMSUNG Adjust the tint of the screen. This menu is not available when Bright is set to Cinema MAGIC Dynamic Contrast mode. Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color.

  • Page 53: Green

    Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.2.1 Configuring Green MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen.

  • Page 54: Blue

    Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.3.1 Configuring Blue MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen.

  • Page 55: Color Tone

    Configuring Tint Color Tone Adjust the general color tone of the picture. 4.4.1 Configuring the Color Tone Settings MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to COLOR...

  • Page 56: Gamma

    Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. 4.5.1 Configuring Gamma MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to COLOR and press [...

  • Page 57: Coordinating Osd

    Coordinating OSD Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.1.1 Configuring Language MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen.

  • Page 58: Menu H-Position & Menu V-Position

    Coordinating OSD Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen.

  • Page 59: Display Time

    Coordinating OSD Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time MENU Press any button on the front of the product to display the Key guide.

  • Page 60: Transparency

    Coordinating OSD Transparency Set the transparency for the menu windows: 5.4.1 Changing Transparency MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to MENU SETTINGS and press [...

  • Page 61: Setup And Reset

    Setup and Reset Reset Return all the settings for the product to the default factory settings. 6.1.1 Initializing Settings (Reset) MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen.

  • Page 62: Eco Saving

    Setup and Reset Eco Saving Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG This menu is not available when Bright is in Dynamic Contrast mode. MAGIC 6.2.1 Configuring Eco Saving MENU Press any button on the front of the product to display the Key guide.

  • Page 63: Off Timer

    Setup and Reset Off Timer You can set the product to automatically turn off. 6.3.1 Configuring Off Timer MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET...

  • Page 64: Turn Off After

    Setup and Reset Turn Off After The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This option is only available when Off Timer is set to On.

  • Page 65: Pc/Av Mode

    Setup and Reset PC/AV Mode PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. This function does not support Analog mode. Supplied for the wide models only such as 16:9 or 16:10. If the monitor (when set to DVI) is in power saving mode or is displaying the message Check MENU...

  • Page 66: Key Repeat Time

    Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.6.1 Configuring Key Repeat Time MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen.

  • Page 67: Source Detection

    Setup and Reset Source Detection You can activate Source Detection. 6.7.1 Configuring Source Detection MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [...

  • Page 68: Customized Key

    [ ] on the product. Press [ ] to move to Customized Key and press [ ] on the product. The following screen will appear. SAMSUNG MAGIC Bright AUTO SAMSUNG Bright Eco Saving Image Size MAGIC Press [ ] to move to the option you want and press [ The selected option will be applied.

  • Page 69: Information Menu And

    INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION MENU Press any button on the front of the product to display the Key guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to INFORMATION.

  • Page 70: Configuring Brightness And Contrast In The Initial Screen

    INFORMATION Menu and Others Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness, Contrast using the [ ] buttons when the initial screen (that displays no menu screen) is displayed. Press any button on the front of the product (when no menu screen is displayed) to display the Key guide.

  • Page 71: Configuring Volume In The Initial Screen

    INFORMATION Menu and Others Configuring Volume in the Initial Screen Adjust the Volume by pressing the [ ] button when the Key Guide is displayed. Press any button on the front of the product (when no menu screen is displayed) to display the Key guide.

  • Page 72: Installing The Software

    Installing the Software MagicTune 8.1.1 What is "MagicTune"? "MagicTune" is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines. You can adjust the product with the mouse and the keyboard without using the operating buttons of the product.

  • Page 73: Removing The Software

    Wait until a message box appears informing you that the software has been removed completely. For technical support, the FAQ (frequently asked questions) or information about the software upgrade for "MagicTune™", please visit our website (http://www.samsung.com/us/consumer/ learningresources/monitor/magetune/pop_intro.html). 8 Installing the Software...

  • Page 74: Multiscreen

    Installing the Software MultiScreen "MultiScreen" enables users to use the monitor by partitioning multiple sections. 8.2.1 Installing the Software Insert the installation CD into the CD-ROM drive. Select the "MultiScreen" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "MultiScreen"...

  • Page 75: Removing The Software

    Installing the Software Hardware At least 32MB of memory At least 60MB of free space on the hard disk drive 8.2.2 Removing the Software Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs. Select "MultiScreen" from the program list and click the Add/Delete button. 8 Installing the Software...

  • Page 76: Troubleshooting Guide

    Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
  • Page 77 Troubleshooting Guide Screen issue Not Optimum Mode is displayed. This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 84).
  • Page 78 Troubleshooting Guide Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue A beeping sound is heard when my PC is booting.
  • Page 79 Troubleshooting Guide Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? Windows XP: Go to Control Panel Appearance and Themes Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Display Settings...
  • Page 80 Troubleshooting Guide Question Answer How can I change the Windows XP: Go to Control Panel Appearance and resolution? Themes Display Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Appearance and Personalization Personalize...

  • Page 81: Specifications

    Specifications 10.1 General Model Name S27C750P Panel Size 27 Inches (68 cm) Display area 597.6 mm (H) x 336.15 mm (V) 23.53 Inches (H) x 13.23 Inches (V) Pixel Pitch 0.31125 mm (H) x 0.31125 mm (V) 0.012254 Inches (H) x 0.012254 Inches (V)
  • Page 82 The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799 10 Specifications...

  • Page 83: Powersaver

    Specifications 10.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse.

  • Page 84: Standard Signal Mode Table

    Specifications 10.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality.
  • Page 85 Specifications Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250 VESA, 1920 x 1080 67.500 60.000 148.500 HDMI...

  • Page 86: Appendix

    Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com...
  • Page 87 (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CYPRUS 8009 4000 only from landline http://www.samsung.com (+30) 210 6897691 from mobile and land line Appendix...
  • Page 88 808 20 - SAMSUNG (808 20 7267) http://www.samsung.com RUMANIA 08008 SAMSUNG (08008 726 http://www.samsung.com 7864) TOLL FREE No. SERBIA 0700 Samsung (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com Appendix...
  • Page 89 Appendix EUROPE SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG http://www.samsung.com/ch (7267864, CHF 0.08/min) (German) http://www.samsung.com/ch_fr (French) 0330 SAMSUNG (7267864) http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com BELARUS 810-800-500-55-500 http://www.samsung.com GEORGIA 0-800-555-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500 http://www.samsung.com (GSM: 7799) KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com...
  • Page 90 1800 3000 8282 1800 266 8282 INDONESIA 0800-112-8888 http://www.samsung.com 021-5699-7777 JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) http://www.samsung.com for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com...
  • Page 91 Appendix MIDDlE EAST MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA ANGOLA 91-726-7864 http://www.samsung.com BOTSWANA 0800-726-000 http://www.samsung.com CAMEROON 7095- 0077 http://www.samsung.com...

  • Page 92: Responsibility For The Pay Service (Cost To Customers)

    If a product damage is caused by; external impact or drop. use of supplies or separately sold product unspecified by Samsung. repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. remodeling or repairing the product by customer.
  • Page 93 Appendix If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual first. Appendix...

  • Page 94: Correct Disposal

    Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.

  • Page 95: Terminology

    Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen.
  • Page 96 Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g.
  • Page 97 Brightness Installation Checking the Contents Key Repeat Time Cleaning Coarse Color Tone Language Connecting and Using a PC Contact SAMSUNG WORLD WIDE Contrast MagicRotation Auto Copyright MultiScreen Correct Disposal Correct posture to use the product Customized Key Off Timer Display Time...
  • Page 98 Index Safety Precautions SAMSUNG MAGIC Bright SAMSUNG MAGIC Upscale Sharpness Source Detection Standard Signal Mode Table Terminology Transparency Turn Off After Index...

Table of Contents