Fault Codes - Fisher & Paykel MINIMAL OB60SM16PLG1 User Manual

How do I know if there is a problem?
Your oven will beep and an alert will show in the display.
What to do
First try to fix the issue and clear the alert according to the instructions onscreen or the
steps in the following table.
Do not turn the oven off at the wall unless it is completely cool. Turning off the power while
the oven is too hot may damage the oven and its surrounding cabinetry.
If the problem persists
1 Note down the fault code.
2 Contact Customer Care or a Fisher & Paykel trained and supported service technician.
Refer to the Service and Warranty booklet for contact details.
If the fault code has disappeared, the fault has been reset and you can continue to use
your oven.
FAULT CODE POSSIBLE CAUSE
A1
The oven has
overheated.
A2
Door lock error:
the door cannot be
locked after you have
started Self Clean.
A3
Door lock error:
the door cannot be
unlocked after Self
Clean has finished.
F
Technical fault.
+ number

FAULT CODES

WHAT TO DO
• Allow the oven to cool down.
• Once the oven has cooled down and the door has
unlocked, the alert code will disappear. You can now use
the oven.
• Turn the power to the oven off at the wall and on again.
• Wait approximately 10 seconds. This will allow the door
lock to return to its initial position.
• Try starting Self Clean again, making sure that you close
the door firmly. Refer to 'Self Clean'.
• Turn the power to the oven off at the wall and on again.
• Gently press the door a few times to help the door
lock disengage.
• If this doesn't help and the alert code reappears,
contact a Fisher & Paykel trained and supported service
technician or Customer Care.
• Note down the alert code.
•
Wait until the cooling fans have stopped and the oven
has completely cooled down.
• Turn the power to the oven off at the wall.
•
Contact a Fisher & Paykel trained and supported service
technician or Customer Care.
45