Panasonic KX-NS300 Getting Started page 30

4.1.1 Easy Setup Wizard
30 Getting Started
6. In the LAN settings:
The IP addresses for the PBX, DNS server, and DSP
cards can be assigned automatically through a DHCP
server or entered manually.
When using a DHCP server:
a.
Select Obtain an IP address automatically.
b.
Select Obtain DNS server address automatically.
c.
Select Obtain DSP IP address automatically.
Notice
The boxes will turn grey and the IP address
information will be assigned automatically.
Write down the address information assigned to
the PBX for future reference.
d.
Click Next.
When not using a DHCP server:
a.
Select Use the following IP address.
b.
Enter an IP address
gateway . (You may not need to specify the default
*1
gateway, depending on your network configuration.)
c.
Select Use the following DNS server address.
d.
Enter the preferred and alternative DNS IP
addresses .
*1
e.
Select Use the following DSP IP address.
f.
Enter IP address
g.
Click Next.
*1 Valid IP address range: "1.0.0.1" to "223.255.255.254"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255"
(except "0.0.0.0" and "255.255.255.255")
, subnet mask , and default
*1 *2
for installed DSP card.
*1