Remote Control Connection; Connections For Stick (Smaw) Welding; Stick Electrode Cable And Work Cable Connection - Lincoln Electric SQUARE WAVE TIG 175 Manual

A-5 A-5
INSTALLATION

REMOTE CONTROL CONNECTION

A remote control receptacle is provided on the case
front of the welder for connecting a remote control to
to the machine. A Foot Amptrol tm , foot activated remote
control, is included with the SQUARE WAVE™ TIG
175. Refer to the Optional Accessories section of this
manual for other available remote controls.
CONNECTIONS FOR STICK (SMAW)
WELDING
STICK ELECTRODE CABLE AND WORK CABLE
CONNECTION
Refer to Included Equipment in the Operation Section
of this manual for STICK welding equipment which is
included with the SQUARE WAVE™ TIG 175.
An electrode holder with cable is supplied with the
SQUARE WAVE™ TIG 175. Turn the Power Switch
"OFF". Connect the cable quick connect plug into the
Electrode/Gas Output Receptacle and turn it clockwise
until it is tight. The work cable and work clamp are fac-
tory connected.
SQUARE WAVE™ TIG 175