Examples; Zoom/Magnification; Picture In Picture (Pip) - Lc6285 Only - Philips LC3631 User Manual

XP LC6281/6285 EVA English 01-08-2003 17:52 Pagina 34

Examples

MENU MENU OK OK
VOLUME + VOLUME +
PICTURE SIZE – PICTURE SIZE – PICTURE SIZE + PICTURE SIZE +
VOLUME – VOLUME –
SOURCE
SOURCE
Philips Home Cinema Projector
5. Operation
The following settings/adjustments follow a slightly different procedure or may need some
further explanation.
STAND BY
PICTURE FORMAT AV MUTE
KEYSTONE FREEZE
PICTURE SIZE MIRROR ZOOM
SWAP PICT.
PIP PIP SOURCE

Zoom/Magnification

CHILD LOCK SOURCE INFO
MENU OK
'Zoom' is used to enlarge a part of the picture.
SMART PICT.
MUTE
1 Press Menu.
CRYSTAL CLEAR
DEMO
– The menu bar appears on the screen.
Use Cursor Control to select 'Zoom' in the Features menu.
2
Use the Cursor Control to adjust the Zoom factor in the 'Magnification' slider
3
(4x, 9x or 16x).
Press OK to confirm and exit the menu.
4
Use Cursor Control to select another section of the enlarged area ('Panning').
5
Note Pressing the Zoom button on the remote control, will immediately bring up the Magnification slider
(step 3). Pressing the Zoom button 4 times in succession will switch off the Zoom function.
Picture in picture (PIP) - LC 6285 only
'PIP' enables projection of a second picture in the currently projected picture.
1 Press Menu.
– The menu bar appears on the screen.
Use Cursor Control to select 'PIP' in the Features menu.
2
Use Cursor Control to select 'On'.
3
– The PIP window will appear on the screen.
Use PIP source on the remote control to select the source from which you wish to project
4
the picture in the PIP window.
If you select 'Auto' the system will check if a source is available. If a source is found then its
picture will be projected.
– The picture of the selected source will be projected in the PIP window.
Press Menu and select 'Features' in the menu bar.
5
Use Cursor Control to move to 'PIP format' and select the required PIP window size
6
('Small', 'Medium' or 'Large').
7 Use Cursor Control to move the cursor to 'PIP location' and press OK.
8 Use Cursor Control to select the required position of the PIP window and confirm with OK.
34
On Screen Display Menu >
English User guide LC 6281 / LC 6285