Examples; Digital Zoom/Magnification; Auto Image; Horizontal Size - Philips bSure 1 User Manual

XP cClear10 English (good) 24-07-2003 15:52 Pagina 34

Examples

AV AV
Source Source Menu Menu
Mute Mute
Lamp Lamp
Stand Stand
by by
Temp Temp
Philips Multimedia Projector
5. Operation
The following settings/adjustments follow a slightly different procedure or may need some
further explanation.

Digital Zoom/Magnification

6
LASER LASER
'Digital Zoom' is used to enlarge a part of the picture.
OK OK
Left Left LEFT LEFT Mouse Mouse RIGHT RIight RIGHT RIight
VOolume VOolume
Menu Menu OK OK
1 Press Menu.
Standby Standby
AV Mute AV Mute On On
Source Source Mode Mode Select Select – The menu bar appears on the screen.
Window Window
2 Use Cursor Control to select 'Zoom' in the Display menu.
3 Use the Cursor Control to adjust the Zoom factor in the 'Magnification' slider (4x, 9x or
16x).
4 Press OK to confirm and exit the menu.
5 Use Cursor Control to select another section of the enlarged area ('Panning').
By pressing the D(igital) Zoom button on the remote control you enter directly into the zoom centre
selection screen (step 4). When Digital Zoom is already active, pressing the D(igital) Zoom button will
show the Magnification slider; pressing the D(igital) Zoom button twice will turn off Digital Zoom.

Auto image

The Auto Image function automatically sizes and positions the image to fit optimally in the
screen picture. In addition it takes care for phase adjustment. It does not affect the selected
picture format. When Auto Image is set to On, the Horizontal size, Shift and Phase options are
greyed out.

Horizontal size

The Horizontal size function is used to size a computer image to make it fit the projected
picture. When the OSD menu is active and the horizontal size option is selected, the level will
be indicated graphically on a linear scale
set to 'Off '.
Phase
The Phase function is used to minimise picture imperfections. When the OSD menu is active
and the horizontal size option is selected, the level will be indicated graphically on a linear scale
(slider).This function is only active when 'Auto image' is set to 'Off '.

Shift

The Shift function adjusts the computer image in horizontal and vertical direction to centre it on
the screen.This function is only active when 'Auto image' is set to 'Off '.
1 Press Menu.
– The menu bar appears on the screen.
2 Use Cursor Control to select 'Shift' in the 'Display' menu.
3 Press OK to activate Shift.
4 Use Cursor Control to position the computer image.
5 Press OK to confirm and store the adjustment.
6 If required, select the next item to be adjusted or press Menu to exit.
34
On Screen Display Menu
(slider).This function is only active when 'Auto image' is
English User guide
>
cClear