Checking And Updating Firmware / Bootbios - Fujitsu PRIMERGY PG-FC202 User Manual

4.3
Checking and Updating Firmware /
BootBIOS
There are two methods to check and update Firmware/BootBIOS. The results will bring no
difference.
"4.3.1 Using LightPulse Utility / NT"(pg.60)
"4.3.2 Using HBAnyware Utility"(pg.62)
The checking procedures are same for Windows Server 2003 and Windows 2000 Server.
4.3.1 Using LightPulse Utility / NT
The card name displayed in LightPulse Utility/NT is "Adapter * - LPe1150 - * Port *".
1
Click the [Start] button
[Emulex]
2
Select [Firmware Maintenance] in the [Category] field.
3
For the firmware version, check the [Revision] value in [Functional
Firmware].
• When the version is "2.70a5", proceed to Step 7.
• When the version is other than "2..70a5", proceed to Step 4.
4
Click [Download].
Although the warning window appears, click [OK].
5
Insert the driver disk (CD-ROM) into the CD-ROM drive, select the
Firmware file in the CD-ROM drive, and click [Open].
Firmware update starts.
6
Check the [Revision] value in [Functional Firmware] is "2.70a5".
60
→
[lpUtilNT] in this order.
[CD-ROM drive]:\FirmBIOS\wf270a5.all
→
[Programs] or [All Programs]
→