Table of Contents
Advertisement
2.1.1
Air duct
The diagrams in this section are for reference only. The system layout may vary with
models, but the installation steps are the same for all models.
To remove the air duct, lift the air duct by the indicated area (blue dot) to remove it from the
chassis.
To reinstall the air duct, align and place the air duct onto the chassis.
Ensure that the alignment holes are aligned with the alignment pins on the riser cards,
and the hooks on the right side of the air duct is correctly hooked onto the standoffs on the
chassis.
2-4
Chapter 2: Hardware Setup
Advertisement
Table of Contents
