Troubleshooting; Storage; Disposal - Silvercrest SBZBK 850 A1 Operation And Safety Notes

˜ Troubleshooting
Fault
The product does not
work.
The suction power is
reduced and the product
does not vacuum any dirt.
The product overheats.
Dust escapes from the
product.
The air that escapes
from the product smells
unpleasant.
The motor is louder than
usual.
˜ Storage
Store the product in the original packaging
when it is not in use.
Clean the product before storage.
Store the product at a dry location out of the
reach of children.
14 GB
Possible cause
The power plug is not
[ 9 ]
connected to the socket-outlet.
Dust container full.
[ 4 ]
Suction path blocked.
Motor filter or HEPA filter
[ ]
clogged.
Motor filter or HEPA filter
[ ]
clogged.
The dust container
[ 4 ]
installed correctly.
Deposits in the suction
paths, the motor filter
[
HEPA filter.
Suction path blocked.
The motor is defective.
Action
Connect the power plug
outlet.
Empty the dust container
(see "Emptying the dust container").
Check the nozzle
brush , the telescopic tube
[ ]
hose and the dust container
1 ] [
blockages and remove them.
Clean the motor filter
HEPA filter (see "Cleaning and care").
Clean the motor filter
HEPA filter (see "Cleaning and care").
was not Install the dust container
(see "Emptying the dust container").
Clean the motor filter
or
] HEPA filter (see "Cleaning and care").
Check the nozzle
brush , the telescopic tube
[ ]
hose and the dust container
[ 1 ]
blockages and remove them.
Contact customer service (see "Service").
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and
fibreboard / 80–98: composite
materials.
to a socket-
[ 9 ]
4 ] [
, the furniture
[ ] [ ] [ ]
, the
[ 2 ]
for
[ 4 ]
and the
[ ]
and the
[ ]
[ 4 ]
and the
[ ]
, the furniture
[ ] [ ] [ ]
, the
2 ] [
for
[ 4 ]