Updating The Software - Sony HT-A3000 Operating Instructions Manual

Updating the Software

By updating your software to the latest
version, you can take advantage of the
newest functions.
For information about update functions,
visit the following website:
• For customers in Americas
https://www.sony.com/am/support
• For customers in Europe
https://www.sony.eu/support
• For customers in Asia-Pacific, Oceania,
Middle East, and Africa
https://www.sony-asia.com/support
Notes
• It may take up to 20 minutes for the
update to be completed.
• An Internet environment is necessary to
perform updates via the Internet.
• While the updating operation is in
progress, do not turn on or off the speaker
system, disconnect the AC power cord
(mains lead), disconnect/connect an
HDMI cable, or operate the speaker
system or TV. Wait for the software
update to complete.
• Set [Setup] - [Advanced Settings] -
[Network Settings] - [Auto Update
Settings] - [Auto Update] to [On] when you
want to perform software updates
automatically. Software update may be
performed even if you select [Off] in [Auto
Update] depending on the details of the
updates. For details, refer to Help Guide.
1
When using the optional
subwoofer, make sure that it is
turned on and connected to the
speaker system. When using the
rear speakers, make sure that they
are connected to the wall outlet
(mains), turned on, and connected
to the speaker system.
The power indicator(s) of the
optional subwoofer and/or rear
speaker light(s) in green.
2
Press HOME.
The home menu appears on the TV
screen.
3
Select [Setup] - [Advanced
Settings] on the home menu.
If the speaker system detects
update information for the speaker
system on the network, the update
notification and [Software Update]
appear on the home menu. In this
case, select [Software Update] and
follow the on-screen instructions.
4
Select [Software Update].
The [Software Update] screen
appears on the TV screen.
5
Select the item for updating.
Select the updating item from the
following items by pressing /
(up/down) and
update the software by following
the on-screen instructions.
When a software update starts, the
speaker system automatically
reboots.
During a software update, [UPDATE]
appears in the front panel display.
After the update is complete, the
speaker system automatically
reboots.
[Network Update]
Updates the software using the available
network. Make sure that the network is
connected to the Internet.
[USB Update]
Updates the software using a USB
memory. For details on updating, refer
to the instructions that are displayed
when downloading the update file.
[Wireless Speakers Update]
Updates the software of the optional
subwoofer and rear speakers when the
software of the speaker system is the
latest version.
(enter), then
43
US