Sony HT-A3000 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Speaker System
  5. HT-A3000
  6. Operating instructions manual
Sony HT-A3000 Operating Instructions Manual

Sony HT-A3000 Operating Instructions Manual

Hide thumbs Also See for HT-A3000:
Table of Contents

Advertisement

Quick Links

Download this manual
Sound Bar
Barre de son
HT-A3000
Operating Instructions
Mode d'emploi
Manual de instrucciones
US
FR
ES

Advertisement

Table of Contents
loading

Related Manuals for Sony HT-A3000

Summary of Contents for Sony HT-A3000

  • Page 1 Sound Bar Operating Instructions Barre de son Mode d’emploi Manual de instrucciones HT-A3000...
  • Page 2 Record the serial number in the Do not place this product close space provided below. Refer to them to medical devices. whenever you call upon your Sony This product (including accessories) has dealer regarding the speaker system. magnet(s) which may interfere with pacemakers, programmable shunt Model No.
  • Page 3 Contact: Sony Customer Information turn on the RF transmitter, which it then Service Center at 1-800-222-SONY (7669) turns off at the end of the packet. Write: Sony Customer Information Therefore, the transmitter will be on only Service Center 12451 Gateway Blvd., Fort...
  • Page 4 This speaker system contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This speaker system may not cause interference; and (2) This speaker system must accept any interference, including interference that may cause undesired operation of the speaker system.

  • Page 5: Table Of Contents

    Watching TV .........23 for HDMI Function) ....38 Operating the Speaker System by Listening to Music/Sound Interlocking with a TV Listening to Sony TV Sound with the Compatible with the “BRAVIA” BLUETOOTH® Function ..24 Sync Function ......39 Listening to Music/Sound with the Changing the Settings BLUETOOTH Function ....
  • Page 6 Additional Information Specifications ....... 53 Playable Types of Audio Files ..55 Supported Input Audio Formats ........56 On BLUETOOTH Communication ......57 Precautions ........58 Copyrights and Trademarks ..59 Index ..........61...

  • Page 7: About Manuals Of The Speaker System

    About Manuals of the Speaker System The information included in each manual is as shown below. Startup Guide For customers in Americas https://rd1.sony.net/ help/ht/a3000/h_uc/ Introduces the initial procedures concerning installation and connection for using the speaker system, and operations until you play music.

  • Page 8: What You Can Do With The Speaker System

    The speaker system supports object-based audio formats such as Dolby Atmos and DTS:X. Blu-ray Disc™ player, set-top box, gaming console, etc. • “Watching TV” (page 23) USB device • “Listening to Sony TV Sound with the BLUETOOTH® Function” (page 24) “Listening to Music on a USB Device” (page 28)
  • Page 9 For customers in Americas https://rd1.sony.net/help/ht/a3000/h_uc/ For customers in other countries/regions https://rd1.sony.net/help/ht/a3000/h_zz/ Optional speakers Optional rear Optional subwoofer speakers For the operations of the optional rear speakers and subwoofer, refer to their operating instructions. For the supported optional speakers, confirm on the Sony website.

  • Page 10: Guide To Parts And Controls

    Guide to Parts and Controls Bar Speaker Front   (power) button  BLUETOOTH indicator Turns on the speaker system or – Flashes quickly in blue: During pairing standby status sets it to standby mode. – Flashes in blue: BLUETOOTH ...
  • Page 11 Rear  IR repeater  (USB) port (page 28) Transmits the remote signal of the  TV IN (OPT) jack TV remote control to the TV.  AC inlet  S-CENTER OUT jack (page 18)  HDMI OUT (TV eARC/ARC) jack Connect a TV that has an HDMI input jack with an HDMI cable.
  • Page 12 Remote Control   (power) Turns on the speaker system or sets it to standby mode. TV (page 23) (MUSIC SERVICE) If you have previously played music on Spotify on the speaker system, you can resume playback by pressing this button. This button may not be available in some countries/regions.
  • Page 13  /// (up/down/left/right) control, replace two batteries with new (page 14) batteries. Use R03 (size AAA) manganese batteries (enter) (page 14) for replacement. BACK (page 14) OPTIONS (page 37) Displays the options menu in the front panel display. HOME (page 14) ...

  • Page 14: Using The Home Menu

    Press /// (up/down/left/ Using the Home Menu right) to select the item that you want, then press (enter). You can display the home menu on the The selected input or setting TV screen by connecting the speaker display appears on the TV screen. system and TV with an HDMI cable.

  • Page 15: Setting Up

    TEMPLATE beam. • Hang the bar speaker horizontally on the reinforced wall. • Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during the installation. • Sony shall not be held responsible for...
  • Page 16  TV BOTTOM LINE” Align the “ Remove the WALL MOUNT printed on the WALL MOUNT TEMPLATE. TEMPLATE with the bottom of your Hang the bar speaker on the TV, then adhere the WALL MOUNT screws. TEMPLATE on the wall with a Align the holes of the rear of the bar commercially available adhesive speaker with the screws, then hang...

  • Page 17: Connecting To A Tv

    Connecting a TV That Is not Connecting to a TV Compatible with ARC/eARC Connecting a TV Compatible Connect the HDMI IN jack on the TV with ARC/eARC and HDMI OUT (TV eARC/ARC) jack on the speaker system with the HDMI cable (supplied). Connect the HDMI IN jack compatible with ARC/eARC on the TV and HDMI OUT (TV eARC/ARC)

  • Page 18: When Your Tv Has The S-Center Speaker In Jack

    Connect the optical digital output When Your TV Has the S- jack on the TV and the TV IN (OPT) jack on the speaker system with an CENTER SPEAKER IN Jack optical digital cable (not supplied). You can output the center part of the speaker system sound from the TV by connecting the TV with the following method.

  • Page 19: Connecting To The Ac Outlet (Mains)

    Note Connecting to the AC Make sure that the connectors are firmly inserted. Outlet (mains) If the length of the TV center speaker mode Connect the AC power cord (mains cable is not sufficient, use a commercially lead) (supplied) to the AC inlet on available stereo mini cable.

  • Page 20: Performing Initial Settings

    Follow the instructions on the Performing Initial screen displayed on the TV to perform initial settings. Settings If the initial setting screen is not displayed, use the TV remote control to switch the input on the TV to the HDMI input that is connected to the speaker system, then press HOME on the remote control of the speaker system.

  • Page 21: Connecting The Optional Speaker

    Press (enter). Connecting the Optional The manual connection is established and the power indicator Speaker of the optional speaker lights in green. Connecting the Optional Notes Speaker with the Manual • If you perform [Start manual linking], Connection [Setup] - [Advanced Settings] - [Speaker Settings] - [Wireless Speaker The optional speaker is connected to the Settings] - [Link mode] is set to [Manual]...
  • Page 22 is selected, it may be improved by selecting [Off]. Notes • If you change the [RF Channel] setting from [Off] to [On], it may take 1 minute to reconnect. • This setting does not appear depending on countries/regions.

  • Page 23: Watching Images

    Watching Images Watching TV Press HOME. The home menu appears on the TV screen. Select [Watch & Listen] - [TV] on the home menu. Select the program using the TV remote control. The selected TV program appears on the TV screen and the TV sound is output from the speaker system.

  • Page 24: Listening To Music/Sound

    Connecting a TV with the BLUETOOTH Function  (power) When using Sony TV* with the BLUETOOTH function, you can listen to sound of the TV or device that is connected to the TV by connecting the speaker system and TV wirelessly.
  • Page 25 Listening to Sound of the Pair the speaker system and TV by Paired TV selecting “HT-A3000” from the list on the TV screen. Turn on the TV with the TV remote Make sure that the BLUETOOTH control.

  • Page 26: Listening To Music/Sound With The Bluetooth Function

    When the TV is turned off, the speaker Listening to Music/Sound system is also turned off by interlocking with the BLUETOOTH with the TV power. Function About operations with the remote control that is supplied with the speaker system Listening to Music by Pairing You can use the following buttons.
  • Page 27 To check the connection status of Make sure that the BLUETOOTH the BLUETOOTH function indicator on the bar speaker flashes quickly in blue and Status BLUETOOTH indicator [PAIRING] appears in the front During pairing Flashes quickly in blue panel display. standby status The speaker system enters the Connection is...

  • Page 28: Listening To Music On A Usb Device

    Select [Watch & Listen] - [USB (Connected)] on the home menu. When the connection is not established, select “HT-A3000” on the mobile device. Select the folder on which songs are stored, then select a song. To disconnect the mobile device The selected song is played and Perform any of the following items.

  • Page 29: Listening To Sound Of The Connected Tv Or Device Using Headphones

    Adjust the volume. Listening to Sound of the Adjust the volume level of the headphones first. Then, adjust the Connected TV or Device volume level of the headphones Using Headphones with +/– on the bar speaker or  (volume) +/– on the remote control.
  • Page 30 To disconnect the paired Listening to Sound with headphones Paired Headphones Perform any of the following items. – Disable the BLUETOOTH function on Set the BLUETOOTH function of the the headphones. – Set [Setup] - [Advanced Settings] - headphones to on. [Bluetooth Settings] - [Bluetooth Press HOME.

  • Page 31: Listening To Music By Connecting To A Network

    • 360 Reality Audio • Spotify • Chromecast built-in • AirPlay Speaker system • Sony | Music Center Computer • AirPlay • Home Network 360 Reality Audio Chromecast built-in™ You can play 360 Reality Audio contents You can select music on the...
  • Page 32 Sony | Music Center You can control the speaker system wirelessly by installing the “Sony | Music Center” app on your smartphone or tablet device. Home Network You can play music files stored on your computer on a network location via your...

  • Page 33: Adjusting The Volume And Sound Quality

    The volume level appears in the front panel display. Adjusting the Volume and Sound Notes Quality • The optional rear speakers are designed for playback of the surround part of the Adjusting the Volume multi-channel sound and surround sound that is created from the 2-channel sound using virtual processing.

  • Page 34: Enjoying Surround Effect (Sound Field)

    [Setup] - [Advanced Settings] - [Audio Settings] - [360 Spatial Sound Enjoying Surround Effect Mapping] is set to [On]. (SOUND FIELD) You can select the type of the surround You can turn the surround effect on or effect in [Setup] - [Advanced Settings] off to suit sound sources.

  • Page 35: Making Dialogs Clearer (Voice)

    Making Dialogs Clearer Enjoying Clear Sound (VOICE) with Low Volume at Midnight (NIGHT) VOICE NIGHT Press VOICE to select the setting. The setting appears in the front Press NIGHT to select the setting. panel display. The setting appears in the front Setting Explanation panel display.

  • Page 36: Adjusting The Delay Between The Picture And Sound

    Adjusting the Delay Enjoying Multiplex Between the Picture and Broadcast Sound (AUDIO) Sound You can enjoy multiplex broadcast sound when the speaker system When the sound does not match the receives a Dolby Digital multiplex pictures on the TV screen, you can adjust broadcast signal.

  • Page 37: Adjusting The Dialog Volume While

    Adjusting the Dialog Volume While the DTS:X Content is Played Back By adjusting the dialog volume, you can easily listen to dialog since it stands out from the ambient noise. This function works while playing content that is compatible with the DTS:X dialog control function.

  • Page 38: Using The Speaker System By Interlocking With A Tv

    • When connecting a device such as a Blu- output device in the TV menu. ray Disc player to a TV with an HDMI cable, – When using Sony TV, turn on the enable its Control for HDMI function. speaker system while the TV is turned •...

  • Page 39: Operating The Speaker System By Interlocking With A Tv Compatible With The "Bravia" Sync Function

    Other Interlocking Functions Menu Operation by TV Remote “BRAVIA” Sync is an extended function Control developed by Sony based on the Control for HDMI function. By connecting You can operate the menu of the “BRAVIA” Sync-compatible devices such speaker system by selecting the name of...

  • Page 40: Changing The Settings

    seconds. However, in some cases, the front panel display and indicators may not turn off. In this case, the brightness of the front Changing the Settings panel display and indicators are the same as [DARK]. Changing the Brightness of the Front Panel Display and Indicators (DIMMER) You can change the brightness of the front panel display and BLUETOOTH...

  • Page 41: Saving Power In Standby

    Saving Power in Standby Performing Easy Setup Mode You can make basic initial settings, speaker settings, and network settings Check that [Setup] - [Advanced for the speaker system easily by Settings] - [System Settings] - [Network/ performing Easy Setup. Bluetooth Standby] is set to [Off]. Press HOME.

  • Page 42: Performing Advanced Settings

    Performing Advanced Settings Using the [Advanced Settings] Menu You can make various adjustments to items such as picture and sound on the [Advanced Settings] menu. Press HOME. The home menu appears on the TV screen. Select [Setup] - [Advanced Settings] on the home menu. The [Advanced Settings] screen appears on the TV screen.

  • Page 43: Updating The Software

    • For customers in Americas notification and [Software Update] https://www.sony.com/am/support appear on the home menu. In this • For customers in Europe case, select [Software Update] and https://www.sony.eu/support follow the on-screen instructions.
  • Page 44 Notes • You can perform [USB Update] by pressing (BLUETOOTH) and  and holding (power) on the bar speaker for 7 seconds. • If updating of the optional subwoofer or rear speakers does not work, move them to a location near the bar speaker and update.

  • Page 45: Troubleshooting

    Search for the cause and Troubleshooting solution of the issue on the Sony support site. Sony support site provides latest Troubleshooting support information and Frequently Asked Questions. If the speaker system does not work • For customers in Americas properly, handle it in the following order.
  • Page 46 For details, refer to the operating Power instructions of your TV. The speaker system cannot be The speaker system does not power turned off.  The speaker system may be in demo  Check that the AC power cord (mains mode.
  • Page 47  Increase the volume on the speaker the BLUETOOTH connection is canceled. system or cancel muting.  Depending on the order in which you No TV sound is output from the turn on the TV and the speaker speaker system. system, the speaker system may be ...
  • Page 48  Press  (muting) or  (volume) + on properly. Remove it if there is any the remote control to cancel the obstacle between speakers or in front muting function (page 12). of speakers.  Make sure the input source is selected correctly.
  • Page 49  Make sure the BLUETOOTH device to  Make sure this speaker system is not be connected with is turned on and receiving interference from a wireless the BLUETOOTH function is enabled. LAN device, other 2.4 GHz wireless  Bring this speaker system and the devices, or a microwave oven.
  • Page 50  Check the wireless connection status headphones, or move this speaker system away from the obstacle. [Setup] - [Advanced Settings] -  Reposition the connected [Speaker Settings] - [Wireless Speaker BLUETOOTH headphones. Settings] - [Check wireless  Switch the wireless LAN frequency of connection].
  • Page 51  Wait a while, and then try again. If you reconnected properly, the display in unplug the speaker system, it will take the front panel display returns to the a while before operations can be normal display. made. Wait for 15 seconds or longer, [HIGH], [TEMP], and [ERROR] appear and then try again.

  • Page 52: Resetting The Speaker System

    The speaker system cannot be turned off or [Advanced Settings] Resetting the Speaker cannot be used./When pressing  System (power), [.DEMO] appears in the front panel display and the speaker If the speaker system still does not system cannot be turned off. operate properly, reset the speaker ...

  • Page 53: Additional Information

    Type A (For connecting USB memory) Wireless LAN section Specifications Communication system IEEE 802.11 a/b/g/n/ac Frequency band 2.4 GHz, 5 GHz Sound Bar (HT-A3000) BLUETOOTH section Amplifier section Communication system U.S. models: BLUETOOTH Specification version 5.0 POWER OUTPUT AND TOTAL HARMONIC...
  • Page 54 Abbreviation for Advanced Audio Wireless Transmitter/ Coding Receiver Section Front L/Front R/Center speaker block section Communication system Speaker Wireless Sound Specification version 46 mm × 93 mm (1 13/16 in × 3 3/4 in) cone type Frequency band Speaker system 5 GHz Acoustic suspension Modulation method...

  • Page 55: Playable Types Of Audio Files

    Playable Types of Audio Files Codec Extension MP3 (MPEG-1 Audio .mp3 Layer III) AAC/HE-AAC .m4a, .aac, .mp4, .3gp WMA9 Standard .wma LPCM .wav FLAC .flac .dsf DSDIFF* .dff AIFF .aiff, .aif ALAC .m4a Vorbis .ogg Monkey’s Audio .ape * The speaker system does not play DST encoded files.

  • Page 56: Supported Input Audio Formats

    Supported Input Audio Formats Supported audio formats differ depending on the input setting of the speaker system. “” indicates the supported audio format and “–” indicates the unsupported audio format in the table below. Format TV input TV input TV input (eARC) (ARC) (OPT)

  • Page 57: On Bluetooth Communication

    Communication performing communication using BLUETOOTH technology. • Sony cannot be held liable in any way for • BLUETOOTH devices should be used damages or other loss resulting from within approximately 10 meters (33 feet) information leaks during communication (unobstructed distance) of each other.

  • Page 58: Precautions

    • Do not place anything at the rear of the If you have any question or problem speaker system that might block the concerning your speaker system, please ventilation holes and cause malfunctions. consult your nearest Sony dealer.

  • Page 59: Copyrights And Trademarks

    For registered trademarks owned by Bluetooth details, refer to Help Guide. SIG, Inc. and any use of such marks by Sony You may not use the speaker system while Group Corporation and its subsidiaries is the software is being updated.
  • Page 60 “BRAVIA” logo is a trademark of Sony 48 kHz) or 909 kbps (88.2/44.1 kHz) is Corporation. selected WALKMAN® and WALKMAN® logo are This product contains software that is registered trademarks of Sony Corporation. subject to the GNU General Public License (“GPL”) or GNU Lesser General Public...

  • Page 61: Index

    Index Buttons AUDIO 36 Remote control 12 BLUETOOTH 26 Resetting 52 DIMMER 40 NIGHT 35 Settings SOUND FIELD 34 Resetting 52 VOICE 35 Setting item 42 Software update 43 ARC 11 Sound Field 34 Audio files 55 Audio format 56 USB device 28 Audio Return Channel 11 Voice mode 35...
  • Page 62 éventuelles mises à jour disponibles, visitez l’URL suivante. https://www.sony.com/am/support El software de este sistema podría actualizarse en el futuro. Para obtener más información sobre las actualizaciones disponibles, visite la siguiente URL. https://www.sony.com/am/support ©2022 Sony Corporation Printed in China Imprimé en China 5-034-489-11(1)
  • Page 63 Sound Bar Startup Guide HT-A3000 5-034-487-11(1) © 2022 Sony Corporation Printed in China...
  • Page 64 What’s in the box Bar speaker (1) Remote control (1) / AC power cord (mains lead) (1) R03 (size AAA) battery (2) (The shape of the plug differs depending on countries/regions) HDMI cable* (1) TV center speaker mode cable (1) Sound Bar WALL MOUNT TEMPLATE (1) Operating Instructions...
  • Page 65 Choose an installation method Mounting on a wall Installing on a shelf/stand For details, refer to the Operating Instructions (separate document). Note • Before connecting the speaker system, disconnect the AC power cord (mains lead) of the TV from the AC outlet (mains). Reconnect it in step 4. •...
  • Page 66 Connect with a TV Is there an HDMI IN jack labeled “eARC” or “ARC” on your TV? HDMI cable (supplied) HDMI cable (supplied) Blu-ray Disc player, Blu-ray Disc player, set-top box or set-top box or gaming console, etc. gaming console, etc. Optical digital cable (not supplied) : Video signal...
  • Page 67 Set up the remote control Turn on the TV and the speaker system AC power cord Power ON (mains lead) AC power cord (mains lead) (supplied) AC power cord (mains lead) (supplied) 0h:02m HELLO PLEASE WAIT HOME Connect the TV’s AC power cord (mains lead) to the AC outlet (mains). Connect the AC power cord (mains lead) to the AC inlet on the speaker system.
  • Page 68 Perform Initial Settings Initial Settings screen / / / / HOME Follow the instructions on the screen displayed on the TV to perform initial settings with / / / and If the initial setting screen is not displayed, use the TV remote control to switch the input on the TV to the HDMI input that is connected to the speaker system, then press HOME on the remote control of the speaker system.
  • Page 69 Listen to sound TV input switch To listen to the audio of the TV Select the desired input to the TV using the TV remote control. The screen switches to the selected input screen and the TV audio is output from the speaker system. If [TV] does not appear in the front panel display on the speaker system, press TV on the remote control of the speaker system to select the TV input.
  • Page 70 Describes all the usage such as the network function Instructions or Help Guide. and playback of connected devices. and the detailed setting method, including the contents of the Operating Instructions. For customers in Americas https://rd1.sony.net/help/ht/a3000/h_ For customers in other countries/ regions https://rd1.sony.net/help/ht/a3000/h_...
  • Page 72 Help Guide Sound Bar HT-A3000 Use this Help Guide when you have any questions on how to use the speaker system. Getting Started About Manuals of the Speaker System What You Can Do with the Speaker System Guide to Parts and Controls...
  • Page 73 What You Can Do by Connecting the Speaker System to a Network Notes on Connecting to the Internet Connecting to a Wireless Network Setting Up a Wireless Network Connection on the Home Menu Setting Up a Wireless Network Connection Using Sony | Music Center...
  • Page 74 Setting Up a Wi-Fi Connection Using an iOS Device Playing music from Amazon Music Prerequisite: Making the Initial Settings for Alexa with Sony | Music Center Audio Formats Available for Playback by Audio Casting Protocol Playing Music with the Amazon Music App...
  • Page 75 Performing Advanced Settings Using the [Advanced Settings] Menu [Speaker Settings] [Audio Settings] [HDMI Settings] [Bluetooth Settings] [System Settings] [Network Settings] [Resetting] [Software Update] Updating the Software Troubleshooting Troubleshooting Power The speaker system does not power up. The speaker system does not turn on even when the TV is turned on. The speaker system turns off when the TV is turned off.
  • Page 76 Sound is not output from some speakers. Sound Field Optimization Sound Field Optimization failed. USB Device Connection The USB device is not recognized. Mobile Device Connection Pairing cannot be achieved. BLUETOOTH connection cannot be completed. Sound of the connected BLUETOOTH mobile device is not output from the speaker system. Headphones Connection with the BLUETOOTH Function Pairing cannot be achieved.
  • Page 77 Spotify cannot be played with the MUSIC SERVICE button, or cannot be played on the way of playback. The speaker system restarts. Resetting the Speaker System Additional Information Playable Types of Audio Files Supported Input Audio Formats On BLUETOOTH® Communication Copyrights and Trademarks 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 78 Help Guide Sound Bar HT-A3000 About Manuals of the Speaker System The information included in each manual is as shown below. Startup Guide Introduces the initial procedures concerning installation and connection for using the speaker system, and operations until you play music.
  • Page 79 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 80 Help Guide Sound Bar HT-A3000 What You Can Do with the Speaker System The speaker system supports object-based audio formats such as Dolby Atmos and DTS:X. Blu-ray Disc™ player, set-top box, gaming console, etc. Wireless LAN router Internet Optional rear speakers...
  • Page 81 What You Can Do by Connecting the Speaker System to a Network Optional speakers For the operations of the optional rear speakers and subwoofer, refer to their operating instructions. For the supported optional speakers, confirm on the Sony website. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 82 Help Guide Sound Bar HT-A3000 Bar Speaker Front (power) button Turns on the speaker system or sets it to standby mode. (input select) button Selects the input for playback on the speaker system. (BLUETOOTH) button (MUSIC SERVICE) button If you have previously played music on Spotify on the speaker system, you can resume playback by pressing this button.
  • Page 83 ARC and enables transmission of the object audio and multi-channel LPCM content that cannot be transmitted with ARC. (USB) port TV IN (OPT) jack Related Topic When Your TV Has the S-CENTER SPEAKER IN Jack 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 84 Help Guide Sound Bar HT-A3000 Remote Control (power) Turns on the speaker system or sets it to standby mode. (MUSIC SERVICE) If you have previously played music on Spotify on the speaker system, you can resume playback by pressing this button.
  • Page 85 When the speaker system does not respond by operating with the remote control, replace two batteries with new batteries. Use R03 (size AAA) manganese batteries for replacement. Related Topic Making Dialogs Clearer (VOICE) Enjoying Clear Sound with Low Volume at Midnight (NIGHT) Enjoying Surround Effect (SOUND FIELD) 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 86 Press (up)/ (down)/ (left)/ (right) to select the item that you want, then press (enter). The selected input or setting display appears on the TV screen. To return to the previous screen, press BACK. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 87 Help Guide Sound Bar HT-A3000 Installing the Bar Speaker Install the bar speaker in the same location as your TV. The bar speaker can be installed on a shelf, such as a TV stand, or mounted on a wall. Installing on a shelf/stand Install the bar speaker in an empty space in front of the TV.
  • Page 88 Reconnect it after connecting the speaker system to a TV. Do not place metal objects near the speaker system. Wireless functions may become unstable. There are ventilation holes at the rear of the bar speaker. Do not block these holes. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 89 Hang the bar speaker horizontally on the reinforced wall. Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during the installation. Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall stability, improper screw installation, natural disasters, etc.
  • Page 90 Center of the TV WALL MOUNT TEMPLATE Align the “ TV BOTTOM LINE” printed on the WALL MOUNT TEMPLATE with the bottom of your TV, then adhere the WALL MOUNT TEMPLATE on the wall with a commercially available adhesive tape, etc. WALL MOUNT TEMPLATE Adhesive tape, etc.
  • Page 91 Align the holes of the rear of the bar speaker with the screws, then hang the bar speaker on the two screws. Note When adhering the WALL MOUNT TEMPLATE on the wall, smooth it out fully. Install the bar speaker apart from the TV by 70 mm (2 7/8 in) or more. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 93 Make sure that the connectors are firmly inserted. Enable the Control for HDMI function on the TV. If the Control for HDMI function on the TV is not enabled, TV sound will not be output from the speaker system. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 94 Help Guide Sound Bar HT-A3000 Connecting a TV That Is not Compatible with ARC/eARC Connect the HDMI IN jack on the TV and HDMI OUT (TV eARC/ARC) jack on the speaker system with the HDMI cable (supplied). HDMI cable (supplied) Connect the optical digital output jack on the TV and the TV IN (OPT) jack on the speaker system with an optical digital cable (not supplied).
  • Page 95 Insert a plug of the optical digital cable in the correct direction by checking the shape of the plug and connector on the bar speaker and TV. If the plug is forcibly inserted in the wrong direction, the connector and plug may be damaged. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 96 Help Guide Sound Bar HT-A3000 When Your TV Has the S-CENTER SPEAKER IN Jack You can output the center part of the speaker system sound from the TV by connecting the TV with the following method. Connect the speaker system and TV with the HDMI cable (supplied).
  • Page 97 Connecting a TV Compatible with ARC/eARC Connecting a TV That Is not Compatible with ARC/eARC 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 98 Connecting to the AC Outlet (mains) Connect the AC power cord (mains lead) (supplied) to the AC inlet on the speaker system, then connect to the AC outlet (mains). AC power cord (mains lead) (supplied) 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 99 Help Guide Sound Bar HT-A3000 Performing Initial Settings Press HOME on the remote control supplied with the speaker system to turn on the speaker system. Operate the remote control by pointing it toward the front of the bar speaker. Wait until [PLEASE WAIT] in the front panel display disappears and the next indication appears in the front panel display.
  • Page 100 Depending on the order in which you turn on the TV and the speaker system, the speaker system may be muted and [MUTING] is displayed on the front panel display of the speaker system. If this happens, turn all devices off, then turn on the speaker system after turning on the TV. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 101 [Manual] automatically. Only the speakers for which [Connected] has been displayed in step 6 connect to the speaker system. If the optional speaker is not properly connected, perform the operation again from step 1. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 102 If sound dropping occurs while [On] is selected, it may be improved by selecting [Off]. Note If you change the [RF Channel] setting from [Off] to [On], it may take 1 minute to reconnect. This setting does not appear depending on countries/regions. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 103 Even if [IR-Repeater] is set to [On], this function may not work depending on your TV. Also, the remote controls of other devices such as an air conditioner may not work correctly. In this case, change the installation position of the speaker system or TV. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 104 When the bar speaker obstructs the remote control sensor of the TV and you cannot operate the TV by the TV remote control, enable the IR repeater function of the speaker system. Hint You can select [TV] directly by pressing TV on the remote control. Related Topic When the TV Remote Control Does not Work 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 105 What You Can Do by Connecting a TV with the BLUETOOTH® Function When using Sony TV(*) with the BLUETOOTH function, you can listen to sound of the TV or device that is connected to the TV by connecting the speaker system and TV wirelessly.
  • Page 106 Help Guide Sound Bar HT-A3000 Listening to TV Sound by Connecting the Speaker System and TV Wirelessly You need to perform pairing of the speaker system and TV by using the BLUETOOTH® function. Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly in advance.
  • Page 107 Pair the speaker system and TV by selecting “HT-A3000” from the list on the TV screen. Make sure that the BLUETOOTH indicator on the bar speaker lights in blue and [TV-BT] appears in the front panel display. A connection between the speaker system and TV has been established.
  • Page 108 Help Guide Sound Bar HT-A3000 Listening to Sound of the Paired TV Turn on the TV with the TV remote control. The speaker system is turned on by interlocking with the TV power and TV sound is output from the speaker system.
  • Page 109 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 110 For the operation method to pair the BLUETOOTH device to the mobile device, refer to the operating instructions of the mobile device. Pair the speaker system and mobile device by selecting “HT-A3000” from the list on the screen of the mobile device.
  • Page 111 If there is no mobile device that has been paired (ex. immediately after the purchase of the speaker system), the speaker system goes into pairing mode simply by changing the input to the BLUETOOTH input. Perform pairing for the second and subsequent mobile devices. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 112 If sound delay occurs, it may be improved by setting [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Connection Quality] to [Priority on Stable Connection]. Hint When the connection is not established, select “HT-A3000” on the mobile device. To disconnect the mobile device...
  • Page 113 Disable the BLUETOOTH function on the mobile device. Press (BLUETOOTH) while the [Bluetooth Audio] screen appears on the TV screen. [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] to [Transmitter] or [Off]. Turn off the speaker system or mobile device. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 114 Help Guide Sound Bar HT-A3000 Listening to Music on a USB Device You can play music files stored on a connected USB device. Connect the USB device to the (USB) port. Press HOME. The home menu appears on the TV screen.
  • Page 115 Repeats a music file that is being played. (Off) Cancels the repeat play. Hint You can rewind/fast forward by pressing and holding (previous)/ (next) on the remote control during playback. Related Topic Playable Types of Audio Files 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 116 Help Guide Sound Bar HT-A3000 Listening to Sound by Pairing with Headphones Set the BLUETOOTH® compatible headphones to pairing mode. Refer to the operating instructions of the headphones for the pairing method. Press HOME. The home menu appears on the TV screen.
  • Page 117 To display the paired headphones on the device list, Set [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] to [Transmitter]. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 118 [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] to [Receiver] or [Off]. Turn off the speaker system or headphones. Select the device name of the connected headphones from [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Device List]. [Connected] of the device name disappears. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 119 Playback of audio/music on the BLUETOOTH device is delayed compared to that on the speaker system due to the characteristics of BLUETOOTH wireless technology. You can enable or disable the reception of LDAC audio from the BLUETOOTH device in [Bluetooth Settings]. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 120 The speaker system supports AirPlay. You can play music on the speaker system by operating an iOS device or a computer. Sony | Music Center You can control the speaker system wirelessly by installing the “Sony | Music Center” app on your smartphone or tablet device. Home Network...
  • Page 121 The server needs to be connected to the same network as that of the speaker system. Related Topic Prerequisite: Making the Initial Settings for Alexa with Sony | Music Center Playing Music with the TIDAL App Prerequisite: Making the Initial Settings for Chromecast built-in...
  • Page 122 If you are not sure whether an in-wall access point can be used as a router, check with your apartment manager or Internet service provider, etc. LAN port on a wall LAN cable Router Wireless LAN 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 123 When connecting to a network that does not appear in the list, select [New connection registration] and follow the on-screen instructions. Enter the security key (or password) using the software keyboard, and then select [Enter]. The speaker system starts connecting to the network. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 124 Setting Up a Wireless Network Connection Using Sony | Music Center Sony | Music Center can connect the speaker system to the same wireless network as that of the mobile device. For details, follow the instruction of the app or refer to the following URL.
  • Page 125 [Setup] - [Advanced Settings] on the home menu. Select [Network Settings]. Make sure that [Wi-Fi Connection] is set to [On]. Select [Internet Settings] - [Next]. Select [Use Apple Setup]. Operate the iOS device by following the on-screen instructions. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 126 HT-A3000 Prerequisite: Making the Initial Settings for Alexa with Sony | Music Center With Sony | Music Center, you can play music from Amazon Music or link the speaker system with an Amazon Alexa Built-in device. To prepare the speaker system and mobile device, connect the mobile device by Wi-Fi to the same network as that of the speaker system, and register the speaker system to an Amazon account.
  • Page 128 ): The speaker system is identified by the device name you specified in the initial settings for Alexa. Cast icon ( ): The speaker system is identified by the device name, [HT-A3000], or the device name you specified in the initial settings for Google Home.
  • Page 129 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 130 360 Reality Audio playback. With Sony | Music Center, you can check the streaming services that provide 360 Reality Audio compatible music. On Sony | Music Center, select the speaker system and then select [Settings] - [About 360 Reality Audio] - [Next].
  • Page 131 The specifications and design of the app may change without notice. Related Topic Audio Formats Available for Playback by Audio Casting Protocol 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 132 Not all of the Amazon Alexa functions are available on the speaker system. Hint Use Sony | Music Center to deregister the speaker system from the Amazon account. Even if you deregister an account on the Alexa app, the speaker system will not recognize that the account has been deregistered.
  • Page 133 When you select either 2-channel audio or 360 Reality Audio compatible music, [360RAcast] appears. Note With Sony | Music Center, you can check the streaming services that provide 360 Reality Audio compatible music. On Sony | Music Center, select the speaker system and then select [Settings] - [About 360 Reality Audio] - [Next].
  • Page 134 This speaker system is compatible with a Google Assistant-enabled device with Chromecast built-in so you can control your music with your voice. Simply link the speaker system to the Google Home app on your mobile device. For details, refer to the Google Home app. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 135 Home). Note With Sony | Music Center, you can check the streaming services that provide 360 Reality Audio compatible music. On Sony | Music Center, select the speaker system and then select [Settings] - [About 360 Reality Audio] - [Next].
  • Page 136 When you have played music on Spotify on the speaker system, the music that was played with Spotify is resumed. Note The Spotify app may not be available in some countries/regions. Related Topic [System Settings] 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 137 If you add the speaker system to the Home app on the iOS device, you can stream music to the speaker system by talking to Siri. Note Since the speaker system does not have a microphone, you cannot talk to the speaker system to operate it. Not all features of Siri are available on the speaker system. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 138 HT-A3000 Using Sony | Music Center Sony | Music Center is an application for controlling compatible Sony audio devices using the mobile device such as a smartphone or tablet. For details about Sony | Music Center, refer to the following URL.
  • Page 139 Listen to music on a PC by using Sony | Music Center. You can play music files stored on the PC by operating Sony | Music Center that is installed to a mobile device such as a smartphone or tablet. For details of Sony | Music Center, refer to the following URL.
  • Page 140 Related Topic Setting Up a Wireless Network Connection on the Home Menu Setting Up a Wireless Network Connection Using Sony | Music Center Setting Up a Wi-Fi Connection Using an iOS Device 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 141 2-channel sound using virtual processing. When the input source does not contain much surround sound, the surround sound from the optional rear speakers may be difficult to hear. REAR (rear speakers volume) +/– does not work when the optional rear speakers are not connected. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 142 [Setup] - [Advanced Settings] - [Audio Settings] - [Sound Field Setting]. You cannot change the setting of [Sound Field Setting] when [Setup] - [Advanced Settings] - [Audio Settings] - [360 Spatial Sound Mapping] is set to [On]. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 143 The setting appears in the front panel display. [Vo.ON]: Dialog is easily heard by enhancing dialog range. [Vo.OFF]: Deactivates the voice mode function. Note When the BLUETOOTH device is connected in BLUETOOTH transmission mode, the voice mode is disabled. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 144 [N.OFF]: Deactivates the night mode function. Note When you turn the speaker system off, this setting is set to [N.OFF] automatically. When the BLUETOOTH device is connected in BLUETOOTH transmission mode, the night mode is disabled. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 145 The adjusting time appears in the front panel display. Adjust the delay using (up)/ (down), then press (enter). You can adjust from 0 msec to 300 msec in 25 msec increments. Press OPTIONS. The options menu in the front panel display turns off. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 146 If your TV’s HDMI IN jack is not compatible with eARC or ARC, connect the TV to the TV IN (OPT) jack with an optical digital cable (not supplied) to output Dolby Digital sound. Related Topic Connecting a TV Compatible with ARC/eARC Connecting a TV That Is not Compatible with ARC/eARC 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 147 Adjust the dialog volume using (up)/ (down), then press (enter). You can adjust from 0.0 dB to 6.0 dB in 1.0 dB increments. Press OPTIONS. The options menu in the front panel display turns off. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 148 To enable the Control for HDMI function of a TV or Blu-ray Disc player, refer to their operating instructions. If you enable the Control for HDMI (“BRAVIA” sync) function when using a TV manufactured by Sony, the Control for HDMI function of the speaker system is also enabled automatically.
  • Page 149 Sync Menu on the TV. Note Some Sony TVs support the Sync Menu. Refer to the operating instructions of your TV to see if your TV supports the Sync Menu. Language follow When you change the language for the on-screen display of the TV, the speaker system’s on-screen display language is also changed.
  • Page 150 “BRAVIA” Sync Function “BRAVIA” Sync is an extended function developed by Sony based on the Control for HDMI function. By connecting “BRAVIA” Sync-compatible devices such as a TV or a Blu-ray Disc player using an HDMI cable, you can control the devices by interlocking them with each other.
  • Page 151 10 seconds. However, in some cases, the front panel display and indicators may not turn off. In this case, the brightness of the front panel display and indicators are the same as [DARK]. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 152 Help Guide Sound Bar HT-A3000 Saving Power in Standby Mode Check that [Setup] - [Advanced Settings] - [System Settings] - [Network/Bluetooth Standby] is set to [Off]. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 153 [Easy Sound Setup]: Performs the basic speaker settings for optimizing the surround sound for your environment. To use this setting, connect the optional subwoofer or rear speakers. [Easy Network Setup]: Performs the basic network settings. Perform settings by following the on-screen instructions. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 154 [System Settings]: Makes the speaker system-related settings. [Network Settings]: Makes detailed settings for the Internet. [Resetting]: Resets the speaker system to the factory default settings. [Software Update]: Updates the software of the speaker system or optional subwoofer/rear speakers. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 155 Help Guide Sound Bar HT-A3000 [Speaker Settings] [Speaker Settings Information] You can apply the [Sound Field Optimization] measured value, or the [Manual Speaker Settings] value to speaker settings. To use this setting, connect the optional subwoofer or rear speakers, execute [Sound Field Optimization] and disable [360 Spatial Sound Mapping].
  • Page 156 [Front]: Sets the front speaker distance. [Subwoofer](*1): Sets the optional subwoofer distance. [Rear Speaker (L)](*2): Sets the optional left rear speaker distance. [Rear Speaker (R)](*2): Sets the optional right rear speaker distance. This item appears when using the optional subwoofer. This item appears when using the optional rear speakers.
  • Page 157 Depending on the audio content, sound may not be output from the TV. When the surround effect is set to [Sound Field: Effect On] by pressing SOUND FIELD on the remote control, sound is not output from the TV. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 158 [Audio Settings] - [360 Spatial Sound Mapping] is set to [Off]. When headphones are connected with the BLUETOOTH function, this function is not available. [Sony | Vertical Surround Engine]: Sony | Vertical Surround Engine enhances the surround and height speaker channels to create an immersive and enveloping virtual surround effect.
  • Page 159 TV program. [On]: Adjusts the volume automatically. [Off]: Off Note Advanced Auto Volume function is not suitable for listening to music. Related Topic Enjoying Surround Effect (SOUND FIELD) 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 160 You can enjoy object audio content, such as Dolby Atmos - Dolby TrueHD and DTS:X or multi-channel LPCM content that cannot be transmitted with ARC by connecting the speaker system and TV compatible with eARC using an HDMI cable. For the connection, see “Connecting a TV Compatible with ARC/eARC .” 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 161 Help Guide Sound Bar HT-A3000 [Bluetooth Settings] [Bluetooth Mode] You can enjoy content from a BLUETOOTH® device by using this speaker system or listen to sound from this speaker system by using BLUETOOTH compatible headphones. [Receiver]: This speaker system is in receiver mode, which enables it to receive and output audio from the BLUETOOTH device.
  • Page 162 Note When connecting a BLUETOOTH device, the [Wireless Playback Quality] setting cannot be changed. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 163 Help Guide Sound Bar HT-A3000 [System Settings] [Language] You can select the language you want for the on-screen display of the speaker system. [IR-Repeater] [On]: Remote signals for the TV are sent from the rear of the bar speaker. [Off]: Turns off the function.
  • Page 164 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 165 Help Guide Sound Bar HT-A3000 [Network Settings] [Wi-Fi Connection] [On]: Enables Wi-Fi connection of the speaker system. [Off]: Disables Wi-Fi connection of the speaker system. [Internet Settings] You can set the network settings and check the network connections. [Network Connection Status] You can display the current network connection status.
  • Page 166 You can set sharing of usage data and confirm the Chromecast built-in feature. [Share usage data] [On]: Provides information related to the use of the cast feature to Google™. [Off]: Off [About Chromecast built-in] Displays the reference URLs for the Chromecast built-in feature. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 167 Sound Bar HT-A3000 [Resetting] You can reset the speaker system settings to the factory default by selecting the group of settings. All the settings within the group will be reset. Related Topic Resetting the Speaker System 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 168 Help Guide Sound Bar HT-A3000 [Software Update] You can update the software of the speaker system or optional subwoofer/rear speakers. Related Topic Updating the Software 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 169 Help Guide Sound Bar HT-A3000 Updating the Software By updating your software to the latest version, you can take advantage of the newest functions. For information about update functions, visit the following website: For customers in Americas https://www.sony.com/am/support For customers in Europe https://www.sony.eu/support...
  • Page 170 You can perform [USB Update] by pressing and holding the (BLUETOOTH) and (power) button on the bar speaker for 7 seconds. If updating of the optional subwoofer or rear speakers does not work, move them to a location near the bar speaker and update. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 171 1. Search for the cause and solution of the issue by referring to these Help Guide or Operating Instructions. The troubleshooting method is listed in “Troubleshooting.” 2. Search for the cause and solution of the issue on the Sony support site. Sony support site provides latest support information and Frequently Asked Questions.
  • Page 172 The speaker system does not power up. Check that the AC power cord (mains lead) is connected securely. Disconnect the AC power cord (mains lead) from the wall outlet (mains), and then reconnect after several minutes. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 173 Depending on the TV, if the sound was output from the speakers of the TV the previous time, the speaker system may not turn on by interlocking with the TV power even when the TV is turned on. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 174 [Setup] - [Advanced Settings] - [HDMI Settings] - [Standby Linked to TV]. When [Standby Linked to TV] is set to [On] or [Auto], the speaker system turns off automatically when you turn off the TV. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 175 TV, set [Standby Linked to TV] to [On]. The TV must support the Control for HDMI function. For details, refer to the operating instructions of your TV. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 176 The speaker system cannot be turned off. The speaker system may be in demo mode. To cancel demo mode, reset the speaker system. Press and hold (power) and – (volume) on the bar speaker for more than 5 seconds. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 177 When there is no picture while the TV input is selected, select the TV channel that you want using the TV remote control. Disconnect an HDMI cable, then connect it again. Make sure that the cable is firmly inserted. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 178 There is an interference of the frequency band between the wireless LAN and the wireless connection of the optional speakers. Switch the band of the wireless LAN connection of the TV or device that is playing an image to 2.4 GHz. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 179 Help Guide Sound Bar HT-A3000 The speaker system cannot connect to a TV with the BLUETOOTH function. When you connect the speaker system and TV with an HDMI cable, the BLUETOOTH connection is canceled. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 180 TV to Audio System. Refer to the operating instructions of your TV regarding how to set the Related Topic Connecting a TV Compatible with ARC/eARC Connecting a TV That Is not Compatible with ARC/eARC 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 181 When you connect the speaker system and TV with the TV center speaker mode cable and set [Setup] - [Advanced Settings] - [Speaker Settings] - [TV Center Speaker Settings] - [TV Center Speaker Mode] to [On], the center part of the speaker system sound is output from the TV. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 182 A time gap between the sound and picture may occur depending on the sound source. If your TV has a function that delays the image, use it for adjustment. For details, refer to the operating instructions of your TV. Related Topic Adjusting the Delay Between the Picture and Sound 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 183 (volume) + on the remote control to cancel the muting function. Make sure the input source is selected correctly. You should try other input sources by pressing the input select button on the remote control (TV/USB/BLUETOOTH). Make sure that the connectors are firmly inserted. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 184 The surround effect cannot be obtained. Depending on the combination of the setting of SOUND FIELD and input signal, surround sound processing may not work effectively. The surround effect may be subtle, depending on the program or disc. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 185 If a device that generates electromagnetic radiation, such as a wireless LAN device or a microwave oven is nearby, move the speaker system away from the device. Refer to the operating instructions of the optional rear speakers/subwoofer. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 186 When [Sound Field Setting] is set to [Dolby Speaker Virtualizer], some speakers may not output sound depending on the input content. Sound is not output from the optional rear speakers when Dual Mono audio is being played. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 187 If there is any obstacle between speakers or the microphone for measurement of the speaker is blocked by an obstacle, Sound Field Optimization cannot be performed properly. Remove it if there is any obstacle between speakers or in front of speakers. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 188 If the USB device is connected via a USB hub or cable, disconnect it and connect the USB device directly to the speaker system. When connecting a WALKMAN® or smartphone, its internal storage or external storage (such as a memory card) may not be recognized. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 189 Make sure this speaker system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this speaker system. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 190 Pair this speaker system and the BLUETOOTH device again. You may need to cancel the pairing with this speaker system using your BLUETOOTH device first. Pairing information may be deleted. Perform the pairing operation again. Related Topic Listening to Music by Pairing the Mobile Device That Is Connected for the First Time 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 191 Switch the wireless LAN frequency of any nearby wireless LAN router or PC to the 5 GHz range. Increase the volume on the connected BLUETOOTH device. Related Topic Listening to Music by Pairing the Mobile Device That Is Connected for the First Time 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 192 Make sure this speaker system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this speaker system. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 193 BLUETOOTH headphones with this speaker system first. Pairing information may be deleted. Perform the pairing operation again. Related Topic Listening to Music by Pairing the Mobile Device That Is Connected for the First Time Listening to Sound by Pairing with Headphones 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 194 [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Wireless Playback Quality] to [LDAC Stable Connection (Auto)] or [SBC Stable Connection (Auto)]. Some content may not be output due to content protection. Related Topic Listening to Music by Pairing the Mobile Device That Is Connected for the First Time 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 195 Help Guide Sound Bar HT-A3000 The BLUETOOTH connection with the headphones becomes disconnected. When using Chromecast built-in, the headphones cannot connect to the speaker system via the BLUETOOTH function. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 196 Move the speaker system away from such devices, or turn off such devices. The wireless LAN connection may become unstable depending on the usage environment, especially while using the BLUETOOTH function of the speaker system. In this case, adjust the usage environment. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 197 Press OPTIONS on the remote control to update the list. If the wireless LAN router you want is still not detected, select [New connection registration] from the network list, then input a network name (SSID) manually. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 198 Help Guide Sound Bar HT-A3000 You cannot connect the speaker system to the Internet. Check the wireless LAN connection. Restart the wireless LAN router. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 199 Remove any obstacles in the path between the remote control and the speaker system. Replace both batteries in the remote control with new ones if they are weak. Make sure you are pressing the correct button on the remote control. Related Topic Bar Speaker 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 200 Help Guide Sound Bar HT-A3000 TV remote control does not work. This problem might be solved by enabling the IR repeater function. Related Topic When the TV Remote Control Does not Work 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 201 [Setup] - [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] - [RF Channel] setting from [Off] to [On], it may take 1 minute for the sound to be output. Refer to the operating instructions of the optional rear speakers/subwoofer. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 202 [Off], and then change to [On] again. Switch the network connection of the TV or Blu-ray Disc player from wireless to wired. [Setup] - [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] - [Wireless Playback Quality] to [Connection]. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 203 Tuner-related devices: up to 4 devices Audio system (receiver/headphones): up to 1 device (used by this speaker system) Related Topic Connecting a TV Compatible with ARC/eARC Connecting a TV That Is not Compatible with ARC/eARC 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 204 [PRTCT] flashes in the front panel display for 5 seconds and the speaker system is turned off. Disconnect the AC power cord (mains lead) and make sure nothing is obstructing the ventilation holes of the speaker system. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 205 For the optional subwoofer, disconnect the AC power cord (mains lead) and make sure nothing is obstructing the ventilation holes of the optional subwoofer, then restart the speaker system. If they are reconnected properly, the display in the front panel display returns to the normal display. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 206 [HIGH], [TEMP], and [ERROR] appear alternately for 2 seconds each in the front panel display, [STANDBY] appears in the front panel display, then the speaker system is turned off. High-temperature is detected in the speaker system. Press (power) to restart the speaker system. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 207 [BT TX] appears in the front panel display. [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] to [Receiver]. [BT TX] appears in the front panel display if [Bluetooth Mode] is set to [Transmitter]. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 208 Move the bar speaker away from the TV within a range that allow those parts to operate properly. For the locations of the sensors and remote control receiver, refer to the operating instructions of the TV. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 209 Help Guide Sound Bar HT-A3000 Wireless functions (wireless LAN, the BLUETOOTH function, or optional subwoofer/rear speakers) are unstable. Do not place metal objects other than a TV around the speaker system. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 210 Help Guide Sound Bar HT-A3000 Music that you are not familiar with suddenly plays. The pre-installed sample music may have been played. Press (input select) on the bar speaker to stop playback. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 211 The speaker system may be in demo mode. To cancel demo mode, reset the speaker system. Press and hold (power) and – (volume) on the bar speaker for more than 5 seconds. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 212 Spotify cannot be played with the MUSIC SERVICE button, or cannot be played on the way of playback. Play music on Spotify on the speaker system by using the Spotify Connect function on the Spotify app of the mobile device. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 213 Sound Bar HT-A3000 The speaker system restarts. When connecting to a TV with a resolution that is different from that of the speaker system, the speaker system may restart to reset the picture output setting. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 214 (power) and – (volume) on the bar speaker for more than 5 seconds. The settings return to their initial status. Note By resetting, the link with the optional subwoofer and rear speakers may be lost. In this case, reconnect them by referring to their operating instructions. 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 215 The speaker system cannot recognize a file/folder depending on the name/meta-data. Some USB devices may not work with this speaker system. The speaker system can recognize Mass Storage Class (MSC) devices (such as flash memory). 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 216 Dolby Atmos - Dolby TrueHD – – Dolby Atmos - Dolby Digital Plus – DTS-ES Discrete 6.1, DTS-ES Matrix 6.1 DTS 96/24 DTS-HD High Resolution Audio – – DTS-HD Master Audio – – DTS:X – – 5-034-491-11(1) Copyright 2022 Sony Corporation...
  • Page 217 BLUETOOTH technology. Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using BLUETOOTH technology.
  • Page 218 LDAC™ and LDAC logo are trademarks of Sony Corporation. LDAC is an audio coding technology developed by Sony that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a Bluetooth connection. Unlike other Bluetooth compatible coding technologies such as SBC, it...
  • Page 219 This offer is valid to anyone in receipt of this information. https://oss.sony.net/Products/Linux/ Please note that Sony cannot answer or respond to any inquiries regarding the content of this source code. “DSEE Extreme” is a trademark of Sony Corporation. “TRILUMINOS” and “TRILUMINOS” logo are a registered trademark of Sony Corporation.

Table of Contents