Sony HT-A3000 Operating Instructions Manual page 116

Help Guide
Sound Bar
HT-A3000
Listening to Sound by Pairing with Headphones
Set the BLUETOOTH® compatible headphones to pairing mode.
1
Refer to the operating instructions of the headphones for the pairing method.
Press HOME.
2
The home menu appears on the TV screen.
Select [Setup] - [Advanced Settings] on the home menu.
3
Select [Bluetooth Settings] - [Bluetooth Mode] - [Transmitter].
4
The speaker system enters BLUETOOTH transmission mode.
Select the name of the headphones from the [Device List] in [Bluetooth Settings].
5
When the BLUETOOTH connection is established, [Connected] appears.
If you cannot find the name of your headphones in [Device List], select [Scan].
Return to the home menu, select
6
The image of the selected input appears on the TV screen, [BT TX] appears in the front panel display, then the
sound is output from the headphones.
Sound from the speaker system is muted at the same time.
Adjust the volume.
7
Adjust the volume level of the headphones first. Then, adjust the volume level of the headphones with +/– on the
bar speaker or
To remove the paired headphones from the device list
1.
Press HOME.
The home menu appears on the TV screen.
2.
Select [Setup] - [Advanced Settings] on the home menu.
3.
Select [Bluetooth Settings] - [Device List].
4.
Move the cursor to the name of the headphones that you want to remove, and then press DISPLAY.
To remove all the paired headphones from the device list, press AUDIO.
5.
Follow the on-screen instructions to remove the desired headphones from the device list.
Note
[Watch & Listen], and select the input.
(volume) +/– on the remote control.
45