D-Link DFL-500 Quick Install Manual page 8
Hide thumbs
Also See for DFL-500:
- Manual (122 pages) ,
- User manual (140 pages) ,
- User manual (114 pages)
Advertisement
•
Select Restart.
Using the CLI:
•
Enter the command.
execute reboot
You can cycle the power on the DFL-500 using the power switch on the back of the unit.
Resetting the DFL-500 to the factory default configuration
If restarting does not solve the problem, you can restore the DFL-500 to its factory default
configuration.
Using the web-based manager:
•
Go to System > Status.
•
Select Restore Factory Defaults and select OK.
The DFL-500 restarts with the configuration that it had when first powered on.
Using the CLI:
•
Enter the command.
execute reset
The DFL-500 restarts with the configuration that it had when first powered on.
Advertisement
