Beko DS 73300 MM User Manual page 36

Energy consumption values
Programmes
Cottons Eco *
Cotton Iron dry
Synthetic cupboard
dry
Contains fluorinated greenhouse gases covered by the Kyoto
Protocol. Hermetically sealed.
* : Energy Label standard program (EN 61121:2012)
All the values on the chart are identified according to EN 61121:2012 standard. Consumption
values may vary from the values in the chart depending on laundry type, wringing speed, ambient
conditions and voltage levels.
5.5 Auxiliary functions
Audible warning
Drying machine makes an audible warning
when the program is completed. If you don't
want it to make an audible warning, press the
"Buzzer" button. When you press the Buzzer
button, a light will illuminate and no audible
warning will be made when the program ends.
C
You can select this function before
or after the program starts.
End time
If you prefer to dry your laundry at a later time,
you can delay start time of the program up to
3 hours, 6 hours or 9 hours using the Delay
function.
Open the loading door and place the laundry.
Select the drying program.
Press the End Time selection button and
set the delay time you wish. When the End
Time button is pressed once, 3 hours delay is
selected and the delay indicator will light up.
If you press the same button again, 6 hours
delay will be selected and when you press for
36
Capacity (kg)
7
7
3,5
"Cottons Eco programme" used at full and partial load is the standard drying programme
to which the information in the label and the fiche relates, that this programme is suitable for
drying normal wet Cottons laundry and that it is the most efficient programme in terms of
energy consumption for Cottons.
Spin
speed in
washing
machine
(rpm)
1000
1000
800
R450a / 0,20 kg - GWP:604 - 0,121
tCO2e
the third time, 9 hours delay will be selected. If
you press the End Time button once again, the
delay will be cancelled.
After the End Time selection is made, start
delayed running for the program selected
pressing the "Start/Stand-by" button.
C
You can add or remove laundry
within end time. At the end of the
Time Delay countdown, the Time
Delay warning indicator turns off
and drying begins
Changing the end time
If you want to change the duration during the
countdown:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and repeat the End Time selection
process.
Approximate
Energy
amount of
consumption
remaining
value kWh
humidity
60% 2,29
60% 1,8
40% 0,8
Dryer / User Manual