1040 Hard Disk Drive Assembly - Lenovo ZhaoYang K4350A Hardware Maintenance Manual

1040 Hard disk drive assembly

For access, remove these FRUs in order:
• "1010 Battery pack" on page 42
• "1020 Bottom slot cover" on page 42
Important notice for replacing a hard disk drive
Always try to run a low-level format before replacing a hard disk drive. This will cause all customer data on the
hard disk drive to be lost. Ensure that the customer has a current backup of the data before doing this task.
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the computer is operating or in suspend mode.
• The drive startup sequence in the computer you are servicing might have been changed. Be extremely
careful during write operations such as copying, saving, or formatting. If you select an incorrect drive,
data or programs can be overwritten.
Removal steps of the hard disk drive assembly
Remove the screws 1 , and then pull the tab
Step Screw (quantity)
1
M2 × 3 mm, flat-head, nylon-coated (2)
2 .
1
1
Color Torque
Black 0.181 Nm
(1.85 kgf-cm)
.
Chapter 8 Removing or replacing a FRU
45