Table of Contents
Advertisement
Removal steps of the battery pack
DANGER
Use only the authorized battery specified for your computer. Any other battery could ignite or
explode.
1. Detach the battery pack connector
Step
Screw (quantity)
2
M2 × 4 mm, wafer-head, nylon-coated (3)
2. Remove the battery pack
1040 Hard disk drive assembly or solid-state drive assembly
For access, remove this FRU:
•
"1020 Base cover assembly" on page 61
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on the drive if possible.
1
, and then remove the screws
3
.
2
that secure the battery pack.
Torque
Color
Black
0.196 Nm
(2.00 kgf-cm)
.
Chapter 9
Removing or replacing a FRU
63
Advertisement
Table of Contents
