Page 1
SATURN EQUIPMENT OWNER’S MANUAL Gas Hotplate – Medium Duty Gas equipment manufactured for Saturn Equipment are for use with the type of gas specified on the rating plate Installation Operation Maintenance ESHP-4– MEDIUM DUTY 4 BURNER HOTPLATE PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE and for installation will be in accordance with National Fuel Gas Code ANSI Z223.1 (latest edition)
Page 2
Equipment sold and Saturn shall not be liable whether in contract or in tort or installed for residential use, or outside the continental United under any other legal theory, for loss of revenue or profit, States is excluded from warranty.
This manual contains the information needed to properly install this appliance, and to use and care for the appliance in a manner which will ensure its optimum performance. SPECIFICATIONS MANIFOLD Total B.T.U. MODEL STYLE GAS TYPE PRESSURE per Hour 4 Burners w/ 104,000 ESHP-4 Natural Gas 5.0" W.C. individual control Page 2...
FEATURES & OPERATING CONTROLS Fig. 1 Gas Hot Plate - Features & Operating Controls AGENCY LISTING INFORMATION This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplied Installation Instructions and maintained according to the instructions in this manual. This appliance meets ANSI Z.83.11 specifications for gas-fired food service equipment.
PRECAUTIONS AND GENERAL INFORMATION WARNING: FIRE HAZARD All servicing of the gas This appliance is intended for use in commercial establishments supply and combustion only. components of this appliance This appliance is intended to prepare food for human consumption. No must be performed by a other use is recommended or authorized by the manufacturer or its technician trained and certified...
DANGER: INSTALLATION (continued) FIRE AND EXPLOSION HAZARD GAS APPLIANCE CODE COMPLIANCE NEVER use an open flame to The installation of gas piping from the outlet side of the gas meter or check for gas leaks. Fire and service regulator to the hotplate must be performed by a technician explosion may result.
Page 8
DANGER: INSTALLATION (continued) FIRE AND EXPLOSION INSTALLING THE HOTPLATE HAZARD Refer to the nameplate. Verify the fuel type and pressure, which must NEVER use an open flame to match the nameplate specifications. Connecting the hotplate to the check for gas leaks. Fire and wrong fuel type and/or pressure will compromise the safety and/or explosion may result.
Page 9
IMPORTANT: INSTALLATION (continued) Adjustments must be performed by a qualified technician only. SET GAS PRESSURE: IMPORTANT: Gas pressure regulator is factory set. This hotplate is shipped from SET PILOT FLAME: the factory equipped for either: The pilot adjustments are located between the control valves for natural gas and adjusted for each set of burners.
GENERAL OPERATION WARNING: FIRE HAZARD Carefully read the description of the hotplate operation on the IF YOU SMELL GAS: specification sheet. DO NOT try to light any appliance. Do NOT use this appliance if it has been submerged in water. DO NOT touch any electrical switch Call a qualified technician to examine the appliance and to service DO NOT use any telephone in your...
Page 11
OPERATION (Continued) WARNING: FIRE HAZARD NEVER attempt to force Inspect the unit for cleanliness before use. Clean as necessary: See or repair a stuck control Cleaning Instructions, page 11. valve. Be sure the pilot light is lit before operation. See Lighting the Pilot Contact your manufacturer Light, page 8.
CLEANING INSTRUCTIONS WARNING: FIRE HAZARD Shut off the gas PREPARATION supply valve before cleaning. Turn gas shut-off valve OFF before cleaning. Allow hotplate to cool completely before cleaning. FREQUENCY CAUTION: Daily BURN HAZARD TOOLS Bristle Brush Allow hotplate to cool completely before Clean Cloth or Sponge cleaning.
TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY Burners won’t light Gas supply off Check main / unit gas valves Air in lines Turn gas valve on. Attempt to light pilot every 15 sec. Pilot valve not lit Turn off gas - allow unit to vent for 5 minutes.
PARTS & SERVICE DESCRIPTION PART NO. IMPORTANT: Use only LEGS, ADJUSTABLE 4” METAL (SET of 4) factory authorized service parts and replacement filters. For factory authorized service, or to order factory authorized replacement parts, contact your manufacturer. CUSTOMER SERVICE DATA please have this information available if calling for service RESTAURANT ______________________________ LOCATION _______________ INSTALLATION DATE _________________________ TECHNICIAN ______________...