2.
3.
2.3.2
Mounting the Device to a Panel
For panel installations, the RUGGEDCOM RMC8388 can be equipped with panel
adapters that allow the device to be attached to a panel using screws.
To mount the device to a panel, do the following:
1.
RUGGEDCOM RMC8388
Installation Manual, 11/2022, C79000-G8976-1188-05
1
DIN Rail
1
DIN Rail Adapter
2
Figure 2.2
Removing the Device from a DIN Rail
Swing the bottom of the device away from the DIN rail.
Lift the device off the DIN rail.
Loosen the screws for the panel adapters located at the top and bottom of the
device.
1
2.3.2 Mounting the Device to a Panel
3
1
2
2
Installing the Device
1
2
1
2
13