Table of Contents
Advertisement
Parallel Port Configuration
The sub-items in this menu allow you to set the parallel port configuration.
Parallel Port [Enabled]
Allows you to enable or disable the parallel port (LPT/LPTE). Configuration options:
[Enabled] [Disabled]
Change Settings [Auto]
Allows you to select the optimal setting for the super IO device.
Configuration options: [Auto] [IO=378h; IRQ=5] [IO=378h: IRQ=5, 6, 7, 10, 11, 12]
[IO=278h; IRQ=5, 6, 7, 10, 11, 12] [IO=3BCh; IRQ=5, 6, 7, 10, 11, 12]
Device Mode [STD Printer Mode]
Allows you to select the printer port mode. Configuration options: [STD Printer mode]
[SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode]
[ECP Mode] [ECP and EPP 1.9 Mode] [ECP and EPP 1.7 Mode]
4.4.11
Intel
This item displays the information of the Intel Server Platform Services configured in the
system.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Intel Sever Platform Services Configuration
ME BIOS Interface Ver :
SPS Version
ME FW Status Value
ME FW State
ME FW Operation State :
ME FW Error Code
ME NM FW Status Value :
BIOS Booting Mode
Cores Disabled
ME FW SKU Information :
End-of-POST Status
4-24
Server Platform Services
1.0
3.0.4.162
:
0xf0345
:
SPS ME FW Active
M0 without UMA
:
No Error
0x80000001
:
Power Optimized Mode
:
0
Node Manager
:
EOP disabled in POST
Chapter 4: BIOS setup
Advertisement
Table of Contents
