Figure 29. Reconnecting the "Y" SAS cable in a high-performance storage controller configuration
For information about SAS cable part numbers, see 5105-22E, 9008-22L, 9009-22A, 9009-22G,
9223-22H, or 9223-22S system parts (http://www.ibm.com/support/knowledgecenter/POWER9/
p9ecs/p9ecs_922_parts.htm).
6. Seat all the front drives and front fillers if present into their slots as shown in Figure 30 on page 32.
Push drive lever (A) until the drive and filler is seated and the lever snaps closed.
Drive backplanes for the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or 9223-22S 31