Preparing The System For Operation - IBM 9009-22A Manual
Drive backplanes
Hide thumbs
Also See for 9009-22A:
- Site and hardware planning (164 pages) ,
- Manual (150 pages) ,
- Instructions manual (32 pages)
Table of Contents
Advertisement
Figure 76. Reconnecting the signal cable and the power cable
3. Replace the air baffles. For instructions, see Replacing the air baffle (www.ibm.com/support/
knowledgecenter/POWER9/p9haj/p9haj_922_airbafflereplace.htm).
Preparing the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or 9223-22S
system for operation after removing and replacing the drive backplane signal cable
To prepare the system for operation after removing and replacing a drive backplane signal cable,
complete the steps in this procedure.
Procedure
1. Slide the service access cover (A) onto the system unit.
2. Close the release latch (B) by pushing it in the direction shown.
88 Power Systems: Power Systems: Drive backplane
Advertisement
Table of Contents
