Gear Shift Indicator (Gsi) - If Equipped - Chrysler 300 2017 Owner's Manual

Hide thumbs Also See for 300 2017:
Table of Contents

Advertisement

Vehicles Equipped With Keyless Enter-N-Go
— Ignition
Use the steering wheel instrument cluster dis-
play controls for the following procedure(s):
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not start
the engine).
2. Push and release the down arrow button to
scroll downward through the main menu to
"Vehicle Info."
3. Push and release the right arrow button to
access the "Oil Life" screen.
4. Push and hold the OK button to reset oil life.
If conditions are met, the gauge and numeric
display will update to show 100%. If condi-
tions are not met a popup message of "To
reset oil life engine must be off with ignition in
run" will be displayed (for five seconds), and
the user will remain at the Oil Life screen.
5. Push and release the up or down arrow
button to exit the submenu screen.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator system
did not reset. If necessary, repeat this proce-
dure.
Secondary Method Of Resetting Engine Oil
Life
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not start
the engine).
2. Fully press the accelerator pedal, slowly,
three times within ten seconds.
3. Without pushing the brake pedal, push the
ENGINE START/STOP button once to return
the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator system
did not reset. If necessary, repeat this procedure.
Gear Shift Indicator (GSI) — If
Equipped
Gear Shift Indicator (GSI) Location
The Gear Shift Indicator (GSI) system is en-
abled when the automatic transmission is in
manual shift mode. The GSI provides the driver
with a visual indication, (+ or -) beside the
current gear, within the instrument cluster dis-
play when the recommended gear shift point
has been reached. This indication notifies the
driver that changing gear will allow a reduction
in fuel consumption.
77

Advertisement

Table of Contents
loading

Table of Contents