Fisher FSAI-CP-90BE3 Service Manual page 90

Service Manual
4.Remove electric box cover 2
Remove the screws on the electric box
cover 2 and detecting plate(WIFI), then
remove the electric box cover 2 and
detecting plate(WIFI).
Note:The position of detection
board(WIFI) may be different for different
models.
5.Remove front case sub-assy
Remove the screws fixing front case.
Note:
a
① Open the screw caps before removing the
screws arround the air outlet.
② The quantity of screws fixing the front
case sub-assy is different for different
models.
Loosen the connection clasps between front
b
case sub-assy and bottom case. Lift up the
front case sub-assy and take it out.
6.Remove display
Screw off the 2 screws that are locking the
display board.
Installation and Maintenance
Electric box cover2
Electric box cover
Screws
Screw
Detecting plate(WIFI)
87