National Instruments VXIpc 800 Series Getting Started page 27

Chapter 3 Default Settings
Getting Started with Your VXIpc 800/700
Table 3-6. VXI/VME-MXI-2 Configuration Editor Default Settings (Continued)
Editor Field
MXI Fair Requester
MXI CLK10 Signal Direction
* Assumes no DRAM is installed. If DRAM is installed, the Address
Space would be A32, and Requested Memory would match the
amount of DRAM.
3-6
Default Setting
Disabled
Set by hardware switch
(VXI-MXI-2 only)
© National Instruments Corporation