Toro TimeCutter MX 5025 Operator's Manual page 33

3. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4. Drain the oil from the engine
Figure 34
5. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
35).
(Figure 34).
g027539
(Figure
33
Figure 35
6. Dispose of the used oil at a recycling center.
Changing the Engine-Oil Filter
Service Interval: Every 200 hours—Change the
engine-oil filter (more often in dirty
or dusty conditions).
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Change the engine-oil filter
Changing
32).
(Figure 36).
g193530