Product Overview; Controls - Toro TimeCutter MX 5025 Operator's Manual

Product Overview

1. Footrest
2. Deflector
3. Height-of-cut lever
4. Motion-control lever
5. Control panel
6. Operator seat
7. Engine
Figure 4
8. Gas-tank cap
9. Smart Speed™ lever
10. Rear drive wheel
11. Mower deck
12. Anti-scalp roller
13. Front caster wheel

Controls

Become familiar with all the controls before you start
the engine and operate the machine.
Control Panel
g028411
1. Throttle control
2. Choke control
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position (Figure
Choke Control
Use the choke control to start a cold engine.
Blade-Control Switch (Power
Takeoff)
The blade-control switch, represented by a
power-takeoff (PTO) symbol, engages and
disengages power to the mower blades
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction
13
Figure 5
3. Blade-control switch
(power takeoff)
4. Key switch
, R , and S . Refer to
FF UN TART
21).
LOW
5).
g032603
to F
AST
(Figure 5).
(Figure 4).