Sony HT-DDW660 Operating Instructions Manual page 3

About This Manual
• The instructions in this manual are for model
HT-DDW660. Check your model number by looking
at the lower right corner of the front panel.
• The instructions in this manual describe the controls
on the receiver. You can also use the controls on the
supplied remote if they have the same or similar
names as those on the receiver. For details on the use
of your remote, see pages 25–28.
The HT-DDW660 consists of:
• Receiver
• Speaker system
– Front speaker (left)
– Front speaker (right)
– Center speaker
– Surround speaker (left)
– Surround speaker (right)
– Sub woofer
STR-K660P
SS-MSP66L
SS-MSP66R
SS-CNP66
This receiver incorporates Dolby* Digital and Pro
SS-MSP66SL
Logic Surround and the DTS** Digital Surround
SS-MSP66SR
System.
SS-WMSP66
* Manufactured under license from Dolby
** "DTS" and "DTS Digital Surround" are registered
About area codes
The area code of the receiver you purchased is
shown on the lower portion of the rear panel (see
the illustration below).
R L
+ +
R L
CENTER FRONT
Any differences in operation, according to the area
code, are clearly indicated in the text, for example,
"Models of area code AA only".
Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are
trademarks of Dolby Laboratories.
trademarks of Digital Theater Systems, Inc.
4-XXX-XXX-XX AA
Area code
GB
3