Table of Contents
Advertisement
Recording while exposure is changed automatically
[Auto Bracket]
Recording mode:
Each time the shutter button is pressed, recordings are made of up to 7 pictures with
different exposure settings based on the Exposure Compensation range.
Example of Auto Bracket recording when [Step] is set to [
is set to [0/–/+]
1st picture
±0 EV
1
Press [
2
Press
and press
3
Press
range and press [MENU/SET]
•
TZ80/TZ81/TZ82
You can also set the amount of compensation by going
to the [Rec] menu and choosing [Auto Bracket].
4
Focus on the subject and take a picture
• If you press and hold the shutter button, a burst of
pictures can be recorded.
• The display of Auto Bracket flashes until all of the burst
pictures you have set are recorded.
• The camera restarts recording from the first still picture
if you change the Auto Bracket settings or turn off the
camera before all of the burst pictures you have set
are recorded.
■
To cancel [Auto Bracket]
2
In step
, select [
206
2nd picture
] button (
)
to select an item ([
to select the compensation
] ([Single]) or [
–1/3 EV
], etc.)
].
Shutter and Drive Settings
] and [Sequence]
3rd picture
+1/3 EV
50
p
DVQP1246
Advertisement
Table of Contents
