Setting The Iso Sensitivity - Panasonic LUMIX DMC-TZ82 Operating Instructions Manual

Setting the ISO Sensitivity

Recording mode:
Set ISO sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
1
Set the menu
→
2
TZ100/TZ101
Select the ISO sensitivity by rotating the
rear dial
TZ80/TZ81/TZ82
Select the ISO sensitivity by rotating the
control dial
3
Press [MENU/SET]
• You can also press the shutter button halfway to set.
AUTO
(Intelligent ISO)
TZ100/TZ101
* *
80 2 /100 2 /125/
200/400/800/
1600/3200/6400/
*
2
12800/25600
TZ80/TZ81/TZ82
80/100/200/400/
800/1600/3200/
*
6400 2
*
1
When [ISO Limit Set]
the range up to the [ISO Limit Set] setting value.
*
2
Only when [Extended ISO] is [ON].
179
[Rec] → [Sensitivity]
ISO sensitivity is automatically set in a range up to 3200 (
*
1
flash on: 1600) depending on the brightness of a subject.
ISO sensitivity is automatically set in a range up to 3200 (
*
1
flash on: 1600) depending on the movement and brightness of a subject.
• The shutter speed is not fixed when the shutter button is pressed halfway.
It is continuously changing to match the movement of the subject until the
shutter button is pressed fully.
ISO sensitivity is fixed at the selected setting.
• When [ISO Increments] is set to [1/3EV], more ISO sensitivity settings can
be selected. (→181)
(→181) is set to other than [OFF], the ISO sensitivity is automatically set in
Adjusting the focus and brightness (exposure)
ISO sensitivity
with the
TZ80/TZ81/TZ82
with the
TZ80/TZ81/TZ82
DVQP1246