Table of Contents
Advertisement
Something not working?
Problem
The door will not open
Spinning starts late or the
machine does not spin
Possible cause
The programme is still
running.
The door lock has not yet
released.
The "anticrease"
(SUDA BEKLETME)
option has been selected.
The unbalance detection
device that prevents
excessive vibration during
spinning and ensures a
stable position has cut in.
Solution
Wait until the end of the
programme before opening
the door.
Wait about 2 minutes for
the door lock to release.
Empty out water in order
to be able to open the
door.
If the laundry is not evenly
distributed inside the drum
at the beginning of the
spin cycle, the machine
detects this and tries to
redistribute it more evenly
by means of a few drum
rotations.
Only when the laundry is
more evenly distributed,
the spin cycle will be
performed.
If, after about 6 minutes,
the laundry is still tangled,
the machine will not spin.
Therefore, if the laundry is
still wet at the end of the
cycle, it is advisable to
redistribute it manually
inside the drum and to
select the spin programme
again.
67
Advertisement
Table of Contents
