Table of Contents
Advertisement
6. Verify the Sensor Bar is
working. Use a digital camera
(like the one on a cell phone)
to take a picture of the
Sensor Bar while the Wii is
powered ON. You should see
five lights on each end of the
bar.
7. If there are no lights on the
Sensor Bar, make sure the
Sensor Bar is connected to
the back of the Wii. You will
need the Fun Center tool kit
to remove the back panel of
the main cabinet to access
the Wii.
3.5 W
R
N
II
EMOTE AND
UNCHUK
Information The Sensor Bar contains a set of
infrared LEDs that the Wii Remote uses to position the
cursor on the TV screen. The pointer device on the
front of the Wii Remote "reads" the LEDs to move the
cursor left, right, up, and down—as well as measure
the distance from the Wii Remote to the TV screen.
S
F
C
TARLIGHT
UN
O
M
ENTER
PERATION
ANUAL
20
31
OF
Advertisement
Table of Contents
