Local Control On/Off; Midi Program Change; Midi Control Change - Yamaha SY35 Product Manual

UTILITY MIDI
Summary: Determines whether the SY35 keyboard
controls the internal tone generator system or
not.
Settings: on, off.
Procedure; Use the
sor to the lower display line. Use the [-1/NO]
and [+1/YES] keys to turn local control on or off.
Summary: Determines how the SY35 will respond
to MIDI program change messages for remote
voice/muiti selection.
Settings: off, common, individual
Procedure: Use the
cursor to the lower display line. The [-1/NO]
and [+1/YES] keys are used to select the
desired MIDI program change mode.
Details: The "off setting turns MIDI program
change reception and transmission off, so MIDI
program change messages received from exter-
nal equipment will not cause the corresponding
SY35 voice to be selected, and no program
change messages will be transmitted by the
SY35 when one of its voices are selected.
54

LOCAL CONTROL ON/OFF

cursor key to move the cur-

MIDI PROGRAM CHANGE

cursor key to move the

MIDI CONTROL CHANGE

Details: Normally, local control will be turned "on"
so that the SY35 keyboard plays its own inter-
nal tone generator system. If you want to control
an external MIDI tone generator or other device
from the SY35 keyboard without playing the
internal tone generator, turn local control "off."
One possibility is to drive the SY35 tone gen-
erator system from an external sequencer while
independently playing a separate external tone
generator from the SY35 keyboard.
In the "common" mode, program change num-
bers 0 through 63 received from external equip-
ment will select SY35 voices 1.1 through 8.8,
and program change numbers 64 through 79
select multi-play setups 1.1 through 2.8. The
card, internal or preset voice banks cannot be
selected via MIDI control. The corresponding
program change number will also be transmitted
by the SY35 when one of its voices are selected.
The "individual" mode allows individual voice
selection for each multi-play part when the
MULTI play mode is active. Program change
between 0 and 63 received in a specific MIDI
channel will change only the voice for the multi-
play part assigned to that channel.
Summary: Determines whether or not the SY35 will
receive and transmit MIDI control change mes-
sages.
Settings: off. on