Local Control On/Off; Midi Program Change; Midi Control Change - Yamaha SY-35 Reference Manual

UTILITY MIDI
MD>LOCAL
Local=on
Summary: Determines whether the SY35 keyboard
controls the internal tone generator system or
not.
Settings: on, off.
6
Procedure: Use the [ ] cursor key to move the cur-
sor to the lower display line. Use the [–1/NO]
and [+1/YES] keys to turn local control on or
off.
MD>PROG.CHANGE
=off
Summary: Determines how the SY35 will respond
to MIDI program change messages for remote
voice/multi selection.
Settings: off, common, individual
Procedure: Use the [
cursor to the lower display line. The [–1/NO]
and [+1/YES] keys are used to select the desired
MIDI program change mode.
Details: The " o f f " setting turns MIDI program
change reception and transmission off, so MIDI
program change messages received from exter-
nal equipment will not cause the corresponding
SY35 voice to be selected, and no program
change messages will be transmitted by the
SY35 when one of its voices are selected.
MD>CTRL.CHANGE
=off
54

LOCAL CONTROL ON/OFF

MIDI PROGRAM CHANGE

6
] cursor key to move the

MIDI CONTROL CHANGE

Details: Normally, local control will be turned
"on" so that the SY35 keyboard plays its own
internal tone generator system. If you want to
control an external MIDI tone generator or
other device from the SY35 keyboard without
playing the internal tone generator, turn local
control "off." One possibility is to drive the
SY35 tone generator system from an external
sequencer while
separate external tone generator from the SY35
keyboard.
In the "common" mode, program change
numbers 0 through 63 received from external
equipment will select SY35 voices 1.1 through
8.8, and program change numbers 64 through
79 select multi-play setups 1.1 through 2.8. The
card, internal or preset voice banks cannot be
selected via MIDI control. The corresponding
program change number will also be transmitted
by the SY35 when one of its voices are selected.
The "individual" mode allows individual voice
selection for each multi-play part when the
MULTI play mode is active. Program change
between 0 and 63 received in a specific MIDI
channel will change only the voice for the multi-
play part assigned to that channel.
Summary: Determines whether or not the SY35 will
receive and transmit MIDI control change mes-
sages.
Settings: off, on
independently playing a