Yamaha SY35 Product Manual page 79

• Dly (Delay)
Summary: Sets the delay time between the begin-
ning of a note and the beginning of LFO opera-
tion for the selected element when the WHEEL
and AFTER TOUCH parameters in the VOICE
COMMON edit mode are both turned off.
Settings: 0 ... 99
Procedure: Use the [ ] and [ ] cursor keys to
select the Dly parameter. Use the [-1/NO] and
[+1/YES] keys to set the desired LFO delay.
Details: The minimum setting "0" results in no
delay, while the maximum setting of "99" pro-
duces maximum delay before the LFO begins
operation.
• Rate
Summary: Sets the rate of LFO "fade in" for the
selected element when the WHEEL and
AFTER TOUCH parameters in the VOICE
COMMON edit mode are both turned off.
Settings: 0 ... 99
Procedure: Use the [ ] and [ ] cursor keys to
select the Rate parameter. Use the [-1/NO] and
[+1/YES] keys to set the desired LFO fade-in
rate.
Details: "0" is the fastest rate. causing the LFO to
start operation at full depth immediately. A set-
ting of 99 produces the longest LFO fade in.
• Spd (Speed)
Summary: Sets the speed of the LFO for the
selected element.
Settings: 0 ... 31
Procedure: Use the [ ] and [ ] cursor keys to
select the Spd parameter. Use the [-1/NO] and
[+1/YES] keys to set the desired LFO speed.
Details: "0" is slowest LFO speed setting; "31"
is the fastest.
The speed parameter can not be edited when the
sample-and-hold (
ELEMENT TONE
) LFO TYPE is selected.
23